Compare Program Name Starts Within Lecture Duration Total Program Hours Days Per week Accredited by Branches available Price
MTC
plumbing system design Variable 3 Hours 21 Hours 3 Days Engineers Syndicate Nasr City 1,300 (EGP)
130.00 EGP
Cashback
Price Including Material
Reserve course Price Including Material
5080 Views

Price

1,300 (EGP) - Price Including Material

Days Per week

3 Days

Lecture Duration

3 Hours

Class Time

Evening

Available branches

Total course hours

21

Start time

6:00:00 PM

End time

9:00:00 PM

Pace

Full Day Training

Accredited by

Engineers Syndicate

Installment

No

Summary

Overview: This course is dealing with the design and specification of plumbing systems Objective : Being able to understand, design and sizing entire Plumbing Systems.        

Material Contents

Session Session Contents 1 Introduction 2 Basics plumbing systems calculations and sizing :

  • Water Supply Systems
  • Sanitary Drainage Systems.
  • Storm Drainage Systems.
  • Venting Systems
3 Components and Equipments :
  • Piping, fittings and accessories.
  • Pumps
  • Water storage tanks, sump pits, trenches and interceptors.
4 Special Plumbing Systems
  • Compressed air system.
  • High rise buildings.
  • Swimming pools.
  • Vacuum Systems.
  • Fuel Gas Piping Systems.
  • Steam and Condensate Piping.
  • Irrigation and fountains systems.
  • Medical gases systems.
  • Site Utility Systems.
5 Plumbing Systems Relevant
  • Mechanical systems
  • Electrical, architecture, structure…etc.
  • Standards and codes.
  • Documents (Project specifications, cost estimation and bill of quantities).
6 Course evaluation

Details & Documents

Documents:
1. Personal card. 2. University card. 3-The Engineers Syndicate card.
Details:
Session Session Contents 1 Introduction 2 Basics plumbing systems calculations and sizing :

  • Water Supply Systems
  • Sanitary Drainage Systems.
  • Storm Drainage Systems.
  • Venting Systems
3 Components and Equipments :
  • Piping, fittings and accessories.
  • Pumps
  • Water storage tanks, sump pits, trenches and interceptors.
4 Special Plumbing Systems
  • Compressed air system.
  • High rise buildings.
  • Swimming pools.
  • Vacuum Systems.
  • Fuel Gas Piping Systems.
  • Steam and Condensate Piping.
  • Irrigation and fountains systems.
  • Medical gases systems.
  • Site Utility Systems.
5 Plumbing Systems Relevant
  • Mechanical systems
  • Electrical, architecture, structure…etc.
  • Standards and codes.
  • Documents (Project specifications, cost estimation and bill of quantities).
6 Course evaluation

Terms & Conditions

1 - Registration in the course before the start date of at least 5 days. 2 - You can cancel the reservation at 3 at most before the start of the course. 3- Certificates approved by the Engineers Syndicate and Autodesk International Company. 4- Certificates can not be obtained in case of absence 3 times at most.

Refund & Cancellation

Booking Terms: 1 - The course is reserved by paying only 200 Egyptian pounds before the start of the course. 2 - Payment can be made by using cash favon. 3. Payment can be made by using postal order. Recovery Terms: 1 - to cancel the reservation of the course before the beginning of the course of not less than 3 days. 2. If the time limit is not met, the amount of the reservation can not be refunded.

  • Highlights
  • Price

    1,300 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    3 Hours

    Class Time

    Evening

    Available branches

    Total course hours

    21

    Start time

    6:00:00 PM

    End time

    9:00:00 PM

    Pace

    Full Day Training

    Accredited by

    Engineers Syndicate

    Installment

    No

  • Product Details
  • Summary

    Overview: This course is dealing with the design and specification of plumbing systems Objective : Being able to understand, design and sizing entire Plumbing Systems.        

    Material Contents

    Session Session Contents 1 Introduction 2 Basics plumbing systems calculations and sizing :

    • Water Supply Systems
    • Sanitary Drainage Systems.
    • Storm Drainage Systems.
    • Venting Systems
    3 Components and Equipments :
    • Piping, fittings and accessories.
    • Pumps
    • Water storage tanks, sump pits, trenches and interceptors.
    4 Special Plumbing Systems
    • Compressed air system.
    • High rise buildings.
    • Swimming pools.
    • Vacuum Systems.
    • Fuel Gas Piping Systems.
    • Steam and Condensate Piping.
    • Irrigation and fountains systems.
    • Medical gases systems.
    • Site Utility Systems.
    5 Plumbing Systems Relevant
    • Mechanical systems
    • Electrical, architecture, structure…etc.
    • Standards and codes.
    • Documents (Project specifications, cost estimation and bill of quantities).
    6 Course evaluation

    Details & Documents

    Documents:
    1. Personal card. 2. University card. 3-The Engineers Syndicate card.
    Details:
    Session Session Contents 1 Introduction 2 Basics plumbing systems calculations and sizing :

    • Water Supply Systems
    • Sanitary Drainage Systems.
    • Storm Drainage Systems.
    • Venting Systems
    3 Components and Equipments :
    • Piping, fittings and accessories.
    • Pumps
    • Water storage tanks, sump pits, trenches and interceptors.
    4 Special Plumbing Systems
    • Compressed air system.
    • High rise buildings.
    • Swimming pools.
    • Vacuum Systems.
    • Fuel Gas Piping Systems.
    • Steam and Condensate Piping.
    • Irrigation and fountains systems.
    • Medical gases systems.
    • Site Utility Systems.
    5 Plumbing Systems Relevant
    • Mechanical systems
    • Electrical, architecture, structure…etc.
    • Standards and codes.
    • Documents (Project specifications, cost estimation and bill of quantities).
    6 Course evaluation

  • Policy Terms
  • Terms & Conditions

    1 - Registration in the course before the start date of at least 5 days. 2 - You can cancel the reservation at 3 at most before the start of the course. 3- Certificates approved by the Engineers Syndicate and Autodesk International Company. 4- Certificates can not be obtained in case of absence 3 times at most.

    Refund & Cancellation

    Booking Terms: 1 - The course is reserved by paying only 200 Egyptian pounds before the start of the course. 2 - Payment can be made by using cash favon. 3. Payment can be made by using postal order. Recovery Terms: 1 - to cancel the reservation of the course before the beginning of the course of not less than 3 days. 2. If the time limit is not met, the amount of the reservation can not be refunded.

    Read More Details
    Inform IBM
    Excel 2013 Dashboard Variable 5 Hours 20 Hours 3 Days Inform IBM Heliopolis Branch 1,800 (EGP)
    126.00 EGP
    Cashback
    Price Including Material
    Reserve course Price Including Material
    2448 Views

    Price

    1,800 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    5 Hours

    Class Time

    Evening

    Available branches

    Total course hours

    20

    Start time

    End time

    Pace

    Full Day Training

    Accredited by

    Inform IBM

    Installment

    No

    Summary

    Objectives Management reports are commonly found in most organizations. They are called
    different names in different organizations. Some of the common names used are  Key Performance Indicator (KPI) report
     Business Dashboard
     Balanced Scorecard
     Daily, Weekly or Monthly Snapshot
     Business Performance Report These management reports provide Senior Managers with a quick overview of the
    business performance in just a few minutes. However, preparing the reports can
    take up a lot of time, as long as a few hours. The whole process is manual if these
    managers and executives only know the common functions and formulas of Excel.
    Unknown to these executives and managers, as much as 90% of their report
    preparation time can be saved if they know how to combine formulas and functions
    in Excel together. If properly setup, they can even do away with calculations and the
    coloring of cells. All they have to do is to change the date in the report and Excel will
    take care of the rest. This means an error free report, caused by manual calculation
    and formatting. Course Outlines: Making the Move to Dashboards
     Getting in the Dashboard
    State of Mind
     Building a Super Model
    Building Basic Dashboard
    Components
     The Pivotal Pivot Table
     Excel Charts for the
    Uninitiated
     The New World of
    Conditional Formatting
     The Art of Dynamic Labeling
    Building Advanced Dashboard
    Components
     Components That Show
    Trending
     Components That Group and
    Bucket Data
     Components That Display
    Performance against a
    Target Advanced Reporting Techniques
     Macro-Charged Reporting
     Giving Users an Interactive
    Interface
    Working with the Outside World
     Using External Data for Your
    Dashboards and Reports
     Sharing Your Work with the
    Outside World The Part of Tens
     Ten Chart Design Principles
     Ten Questions to Ask Before
    Distributing Your Dashboard

    Material Contents

    NA

    Details & Documents

    Documents:
    NA
    Details:
    Objectives Management reports are commonly found in most organizations. They are called
    different names in different organizations. Some of the common names used are  Key Performance Indicator (KPI) report
     Business Dashboard
     Balanced Scorecard
     Daily, Weekly or Monthly Snapshot
     Business Performance Report These management reports provide Senior Managers with a quick overview of the
    business performance in just a few minutes. However, preparing the reports can
    take up a lot of time, as long as a few hours. The whole process is manual if these
    managers and executives only know the common functions and formulas of Excel.
    Unknown to these executives and managers, as much as 90% of their report
    preparation time can be saved if they know how to combine formulas and functions
    in Excel together. If properly setup, they can even do away with calculations and the
    coloring of cells. All they have to do is to change the date in the report and Excel will
    take care of the rest. This means an error free report, caused by manual calculation
    and formatting. Course Outlines: Making the Move to Dashboards
     Getting in the Dashboard
    State of Mind
     Building a Super Model
    Building Basic Dashboard
    Components
     The Pivotal Pivot Table
     Excel Charts for the
    Uninitiated
     The New World of
    Conditional Formatting
     The Art of Dynamic Labeling
    Building Advanced Dashboard
    Components
     Components That Show
    Trending
     Components That Group and
    Bucket Data
     Components That Display
    Performance against a
    Target Advanced Reporting Techniques
     Macro-Charged Reporting
     Giving Users an Interactive
    Interface
    Working with the Outside World
     Using External Data for Your
    Dashboards and Reports
     Sharing Your Work with the
    Outside World The Part of Tens
     Ten Chart Design Principles
     Ten Questions to Ask Before
    Distributing Your Dashboard

    Terms & Conditions

    NA

    Refund & Cancellation

    NA

  • Highlights
  • Price

    1,800 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    5 Hours

    Class Time

    Evening

    Available branches

    Total course hours

    20

    Start time

    End time

    Pace

    Full Day Training

    Accredited by

    Inform IBM

    Installment

    No

  • Product Details
  • Summary

    Objectives Management reports are commonly found in most organizations. They are called
    different names in different organizations. Some of the common names used are  Key Performance Indicator (KPI) report
     Business Dashboard
     Balanced Scorecard
     Daily, Weekly or Monthly Snapshot
     Business Performance Report These management reports provide Senior Managers with a quick overview of the
    business performance in just a few minutes. However, preparing the reports can
    take up a lot of time, as long as a few hours. The whole process is manual if these
    managers and executives only know the common functions and formulas of Excel.
    Unknown to these executives and managers, as much as 90% of their report
    preparation time can be saved if they know how to combine formulas and functions
    in Excel together. If properly setup, they can even do away with calculations and the
    coloring of cells. All they have to do is to change the date in the report and Excel will
    take care of the rest. This means an error free report, caused by manual calculation
    and formatting. Course Outlines: Making the Move to Dashboards
     Getting in the Dashboard
    State of Mind
     Building a Super Model
    Building Basic Dashboard
    Components
     The Pivotal Pivot Table
     Excel Charts for the
    Uninitiated
     The New World of
    Conditional Formatting
     The Art of Dynamic Labeling
    Building Advanced Dashboard
    Components
     Components That Show
    Trending
     Components That Group and
    Bucket Data
     Components That Display
    Performance against a
    Target Advanced Reporting Techniques
     Macro-Charged Reporting
     Giving Users an Interactive
    Interface
    Working with the Outside World
     Using External Data for Your
    Dashboards and Reports
     Sharing Your Work with the
    Outside World The Part of Tens
     Ten Chart Design Principles
     Ten Questions to Ask Before
    Distributing Your Dashboard

    Material Contents

    NA

    Details & Documents

    Documents:
    NA
    Details:
    Objectives Management reports are commonly found in most organizations. They are called
    different names in different organizations. Some of the common names used are  Key Performance Indicator (KPI) report
     Business Dashboard
     Balanced Scorecard
     Daily, Weekly or Monthly Snapshot
     Business Performance Report These management reports provide Senior Managers with a quick overview of the
    business performance in just a few minutes. However, preparing the reports can
    take up a lot of time, as long as a few hours. The whole process is manual if these
    managers and executives only know the common functions and formulas of Excel.
    Unknown to these executives and managers, as much as 90% of their report
    preparation time can be saved if they know how to combine formulas and functions
    in Excel together. If properly setup, they can even do away with calculations and the
    coloring of cells. All they have to do is to change the date in the report and Excel will
    take care of the rest. This means an error free report, caused by manual calculation
    and formatting. Course Outlines: Making the Move to Dashboards
     Getting in the Dashboard
    State of Mind
     Building a Super Model
    Building Basic Dashboard
    Components
     The Pivotal Pivot Table
     Excel Charts for the
    Uninitiated
     The New World of
    Conditional Formatting
     The Art of Dynamic Labeling
    Building Advanced Dashboard
    Components
     Components That Show
    Trending
     Components That Group and
    Bucket Data
     Components That Display
    Performance against a
    Target Advanced Reporting Techniques
     Macro-Charged Reporting
     Giving Users an Interactive
    Interface
    Working with the Outside World
     Using External Data for Your
    Dashboards and Reports
     Sharing Your Work with the
    Outside World The Part of Tens
     Ten Chart Design Principles
     Ten Questions to Ask Before
    Distributing Your Dashboard

  • Policy Terms
  • Terms & Conditions

    NA

    Refund & Cancellation

    NA

    Read More Details
    CAD Masters
    Advanced V-ray & Rendering application (Special Discount) -14/4/2019 5:45 2 weeks 3:30 Hours 50 Hours 3 Days Autodesk Tayaran Street - Nasr City 3,465 (EGP)
    173.25 EGP
    Cashback
    Price Including Material
    Reserve course Price Including Material
    4445 Views

    Price

    3,465 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    3 :30 Hours

    Class Time

    Evening

    Available branches

    Total course hours

    50

    Start date

    2019-04-14

    End date

    2019-05-30

    Start time

    8:30:00 PM

    End time

    11:00:00 PM

    Pace

    Half Day Training

    Accredited by

    Autodesk

    Installment

    Yes

    Summary

    DESCRIPTION Autodesk 3ds Max Design visualization software provides architects, designers, civil engineers, and visualization specialists with 3D modeling, rendering, animation, and compositing tools to help create cinematic-quality visuals and movies. 3ds Max Design integrates NVIDIA  ira rendering technology to help users get more predictable, photorealistic results without worrying about rendering settings, and features lighting simulation tools validated by the National Research Council Canada. Smooth interoperability with AutodeskRevitsoftware, Autodesk Inventor software, Adobe Photoshop and After Effects, as well as many CAD products, enables architects and designers to more rapidly aggregate their CAD data into emotionally engaging visualizations in order to validate and sell their designs.   OBJECTIVES: In this course, students learn how to use 3D Studio max to model, apply material, add lights and cameras, render still images and animate architectural or interior scenes. Scenes could be imported from AutoCAD as 3D or as 2D and fully modeled in Max.   TRAINING STRUCTURE: Autodesk 3Ds Max design (Architectural course) + V-ray + plug-ins  25 class x 2.5 hours = 60 hours   COURSE TEXTBOOKS AND OTHER READING MATERIALS We recommend the following resources:

    • Mastering Autodesk 3Ds Max 2013 (ISBN-10: 1118129717 & ISBN-13: 978-1118129715)
    • Autodesk 3Ds Max 2014 Essentials (ISBN-10: 1118575148 & ISBN-13: 978-1118575147)
      Web Resources:  PREREQUISITES:
    • Basic knowledge and skills about using computers.
    • Architecture or interior background is recommended
      COURSE GRADING: Attendance 40% Assignments (workshop + 2 projects) 60% To pass the course and receive both Autodesk certificate & CAD MASTERS certificate you should:
    • Attend at least 80% of course hours.
    • Score more than 70% as a total score.

    Material Contents

    -

    Details & Documents

    Documents:
    -
    Details:
    -

    Terms & Conditions

    1. Terms By accessing this web site, you are agreeing to be bound by these web site Terms and Conditions of Use, applicable laws and regulations and their compliance. If you disagree with any of the stated terms and conditions, you are prohibited from using or accessing this site. The materials contained in this site are secured by relevant copyright and trade mark law. 2. Use License Permission is allowed to temporarily download one duplicate of the materials (data or programming) on CAD MASTERS’s site for individual and non-business use only. This is the just a permit of license and not an exchange of title, and under this permit you may not: modify or copy the materials; use the materials for any commercial use , or for any public presentation (business or non-business); attempt to decompile or rebuild any product or material contained on CAD MASTERS’s site; remove any copyright or other restrictive documentations from the materials; or transfer the materials to someone else or even “mirror” the materials on other server. This permit might consequently be terminated if you disregard any of these confinements and may be ended by CAD MASTERS whenever deemed.
    After permit termination or when your viewing permit is terminated, you must destroy any downloaded materials in your ownership whether in electronic or printed form. 3. Disclaimer The materials on CAD MASTERS’s site are given “as is”. CAD MASTERS makes no guarantees, communicated or suggested, and thus renounces and nullifies every single other warranties, including without impediment, inferred guarantees or states of merchant ability, fitness for a specific reason, or non-encroachment of licensed property or other infringement of rights. Further, CAD MASTERS does not warrant or make any representations concerning the precision, likely results, or unwavering quality of the utilization of the materials on its Internet site or generally identifying with such materials or on any destinations connected to this website. 4. Constraints In no occasion should CAD MASTERS or its suppliers subject for any harms (counting, without constraint, harms for loss of information or benefit, or because of business interference,) emerging out of the utilization or powerlessness to utilize the materials on CAD MASTERS’s Internet webpage, regardless of the possibility that CAD MASTERS or a CAD MASTERS approved agent has been told orally or in written of the likelihood of such harm. Since a few purview’s don’t permit constraints on inferred guarantees, or impediments of obligation for weighty or coincidental harms, these confinements may not make a difference to you. 5. Amendments and Errata The materials showing up on CAD MASTERS’s site could incorporate typographical, or photographic mistakes. CAD MASTERS does not warrant that any of the materials on its site are exact, finished, or current. CAD MASTERS may roll out improvements to the materials contained on its site whenever without notification. CAD MASTERS does not, then again, make any dedication to update the materials. 6. Links CAD MASTERS has not checked on the majority of the websites or links connected to its website and is not in charge of the substance of any such connected webpage. The incorporation of any connection does not infer support by CAD MASTERS of the site. Utilization of any such connected site is at the user’s own risk. 7. Site Terms of Use Modifications CAD MASTERS may update these terms of utilization for its website whenever without notification. By utilizing this site you are consenting to be bound by the then current form of these Terms and Conditions of Use. 8. Governing Law Any case identifying with CAD MASTERS’s site should be administered by the laws of the country of Egypt CAD MASTERS State without respect to its contention of law provisions. General Terms and Conditions applicable to Use of a Web Site. Privacy Policy Your privacy is critical to us. Likewise, we have built up this Policy with the end goal you should see how we gather, utilize, impart and reveal and make utilization of individual data. The following blueprints our privacy policy.
    Before or at the time of collecting personal information, we will identify the purposes for which information is being collected.
    We will gather and utilization of individual data singularly with the target of satisfying those reasons indicated by us and for other good purposes, unless we get the assent of the individual concerned or as required by law. We will just hold individual data the length of essential for the satisfaction of those reasons.
    We will gather individual data by legal and reasonable means and, where fitting, with the information or assent of the individual concerned. Personal information ought to be important to the reasons for which it is to be utilized, and, to the degree essential for those reasons, ought to be exact, finished, and updated.
    We will protect individual data by security shields against misfortune or burglary, and also unapproved access, divulgence, duplicating, use or alteration.
    We will promptly provide customers with access to our policies and procedures for the administration of individual data. We are focused on leading our business as per these standards with a specific end goal to guarantee that the privacy of individual data is secure and maintained.

    Refund & Cancellation

    -

  • Highlights
  • Price

    3,465 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    3 :30 Hours

    Class Time

    Evening

    Available branches

    Total course hours

    50

    Start date

    2019-04-14

    End date

    2019-05-30

    Start time

    8:30:00 PM

    End time

    11:00:00 PM

    Pace

    Half Day Training

    Accredited by

    Autodesk

    Installment

    Yes

  • Product Details
  • Summary

    DESCRIPTION Autodesk 3ds Max Design visualization software provides architects, designers, civil engineers, and visualization specialists with 3D modeling, rendering, animation, and compositing tools to help create cinematic-quality visuals and movies. 3ds Max Design integrates NVIDIA  ira rendering technology to help users get more predictable, photorealistic results without worrying about rendering settings, and features lighting simulation tools validated by the National Research Council Canada. Smooth interoperability with AutodeskRevitsoftware, Autodesk Inventor software, Adobe Photoshop and After Effects, as well as many CAD products, enables architects and designers to more rapidly aggregate their CAD data into emotionally engaging visualizations in order to validate and sell their designs.   OBJECTIVES: In this course, students learn how to use 3D Studio max to model, apply material, add lights and cameras, render still images and animate architectural or interior scenes. Scenes could be imported from AutoCAD as 3D or as 2D and fully modeled in Max.   TRAINING STRUCTURE: Autodesk 3Ds Max design (Architectural course) + V-ray + plug-ins  25 class x 2.5 hours = 60 hours   COURSE TEXTBOOKS AND OTHER READING MATERIALS We recommend the following resources:

    • Mastering Autodesk 3Ds Max 2013 (ISBN-10: 1118129717 & ISBN-13: 978-1118129715)
    • Autodesk 3Ds Max 2014 Essentials (ISBN-10: 1118575148 & ISBN-13: 978-1118575147)
      Web Resources:  PREREQUISITES:
    • Basic knowledge and skills about using computers.
    • Architecture or interior background is recommended
      COURSE GRADING: Attendance 40% Assignments (workshop + 2 projects) 60% To pass the course and receive both Autodesk certificate & CAD MASTERS certificate you should:
    • Attend at least 80% of course hours.
    • Score more than 70% as a total score.

    Material Contents

    -

    Details & Documents

    Documents:
    -
    Details:
    -

  • Policy Terms
  • Terms & Conditions

    1. Terms By accessing this web site, you are agreeing to be bound by these web site Terms and Conditions of Use, applicable laws and regulations and their compliance. If you disagree with any of the stated terms and conditions, you are prohibited from using or accessing this site. The materials contained in this site are secured by relevant copyright and trade mark law. 2. Use License Permission is allowed to temporarily download one duplicate of the materials (data or programming) on CAD MASTERS’s site for individual and non-business use only. This is the just a permit of license and not an exchange of title, and under this permit you may not: modify or copy the materials; use the materials for any commercial use , or for any public presentation (business or non-business); attempt to decompile or rebuild any product or material contained on CAD MASTERS’s site; remove any copyright or other restrictive documentations from the materials; or transfer the materials to someone else or even “mirror” the materials on other server. This permit might consequently be terminated if you disregard any of these confinements and may be ended by CAD MASTERS whenever deemed.
    After permit termination or when your viewing permit is terminated, you must destroy any downloaded materials in your ownership whether in electronic or printed form. 3. Disclaimer The materials on CAD MASTERS’s site are given “as is”. CAD MASTERS makes no guarantees, communicated or suggested, and thus renounces and nullifies every single other warranties, including without impediment, inferred guarantees or states of merchant ability, fitness for a specific reason, or non-encroachment of licensed property or other infringement of rights. Further, CAD MASTERS does not warrant or make any representations concerning the precision, likely results, or unwavering quality of the utilization of the materials on its Internet site or generally identifying with such materials or on any destinations connected to this website. 4. Constraints In no occasion should CAD MASTERS or its suppliers subject for any harms (counting, without constraint, harms for loss of information or benefit, or because of business interference,) emerging out of the utilization or powerlessness to utilize the materials on CAD MASTERS’s Internet webpage, regardless of the possibility that CAD MASTERS or a CAD MASTERS approved agent has been told orally or in written of the likelihood of such harm. Since a few purview’s don’t permit constraints on inferred guarantees, or impediments of obligation for weighty or coincidental harms, these confinements may not make a difference to you. 5. Amendments and Errata The materials showing up on CAD MASTERS’s site could incorporate typographical, or photographic mistakes. CAD MASTERS does not warrant that any of the materials on its site are exact, finished, or current. CAD MASTERS may roll out improvements to the materials contained on its site whenever without notification. CAD MASTERS does not, then again, make any dedication to update the materials. 6. Links CAD MASTERS has not checked on the majority of the websites or links connected to its website and is not in charge of the substance of any such connected webpage. The incorporation of any connection does not infer support by CAD MASTERS of the site. Utilization of any such connected site is at the user’s own risk. 7. Site Terms of Use Modifications CAD MASTERS may update these terms of utilization for its website whenever without notification. By utilizing this site you are consenting to be bound by the then current form of these Terms and Conditions of Use. 8. Governing Law Any case identifying with CAD MASTERS’s site should be administered by the laws of the country of Egypt CAD MASTERS State without respect to its contention of law provisions. General Terms and Conditions applicable to Use of a Web Site. Privacy Policy Your privacy is critical to us. Likewise, we have built up this Policy with the end goal you should see how we gather, utilize, impart and reveal and make utilization of individual data. The following blueprints our privacy policy.
    Before or at the time of collecting personal information, we will identify the purposes for which information is being collected.
    We will gather and utilization of individual data singularly with the target of satisfying those reasons indicated by us and for other good purposes, unless we get the assent of the individual concerned or as required by law. We will just hold individual data the length of essential for the satisfaction of those reasons.
    We will gather individual data by legal and reasonable means and, where fitting, with the information or assent of the individual concerned. Personal information ought to be important to the reasons for which it is to be utilized, and, to the degree essential for those reasons, ought to be exact, finished, and updated.
    We will protect individual data by security shields against misfortune or burglary, and also unapproved access, divulgence, duplicating, use or alteration.
    We will promptly provide customers with access to our policies and procedures for the administration of individual data. We are focused on leading our business as per these standards with a specific end goal to guarantee that the privacy of individual data is secure and maintained.

    Refund & Cancellation

    -

    Read More Details
    Herotec
    Java SE & Android Diploma Variable 4 Hours 120 Hours 3 Days Herotec Nasr City Branch 2,000 (EGP)
    180.00 EGP
    Cashback
    Price Including Material
    Reserve course Price Including Material
    620 Views

    Price

    2,000 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    4 Hours

    Class Time

    Evening

    Available branches

    Total course hours

    120

    Start time

    End time

    Pace

    Half Day Training

    Accredited by

    Herotec

    Installment

    No

    Summary

    Android is an open source project   of   the   open Handset  Alliance that  has  revolutionized device Android ,  it  is a fact  that  mobile  device        will  have  more   user-friendly    applications        than ever   before   and  putting  the  internet in       the handsets  of  many,  many  people  around      the world.  The   biggest   advantage is   the success of Android depends on the availability of   unique and engaging    user      applications created       by      developers    just   like you. Practically   anyone can contribute   applications   to    the   Android    community, making it    more possible for the world      to    experience      your innovative ideas.

    Terms & Conditions

    NA

    Refund & Cancellation

    NA

  • Highlights
  • Price

    2,000 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    4 Hours

    Class Time

    Evening

    Available branches

    Total course hours

    120

    Start time

    End time

    Pace

    Half Day Training

    Accredited by

    Herotec

    Installment

    No

  • Product Details
  • Summary

    Android is an open source project   of   the   open Handset  Alliance that  has  revolutionized device Android ,  it  is a fact  that  mobile  device        will  have  more   user-friendly    applications        than ever   before   and  putting  the  internet in       the handsets  of  many,  many  people  around      the world.  The   biggest   advantage is   the success of Android depends on the availability of   unique and engaging    user      applications created       by      developers    just   like you. Practically   anyone can contribute   applications   to    the   Android    community, making it    more possible for the world      to    experience      your innovative ideas.

  • Policy Terms
  • Terms & Conditions

    NA

    Refund & Cancellation

    NA

    Read More Details
    Inform IBM
    CCNA Routing and Switching On Demand 5 Hours 68 Hours 2 Days cisco international Heliopolis Branch 1,900 (EGP)
    133.00 EGP
    Cashback
    Price Including Material
    Reserve course Price Including Material
    4234 Views

    Price

    1,900 (EGP) - Price Including Material

    Days Per week

    2 Days

    Lecture Duration

    5 Hours

    Class Time

    Morning

    Available branches

    Total course hours

    68

    Start date on demand

    Yes

    Start time

    1:00:00 AM

    End time

    1:00:00 AM

    Pace

    Half Day Training

    Accredited by

    cisco international

    Installment

    No

    Summary

    The role and skills required of a core network engineer are evolving significantly as enterprise networks encounter increased business demands and technology advancements. To meet these challenges, skilled IT professionals are needed with up-to-date, networking skills. For individuals looking to build and validate Cisco networking fundamentals, the Cisco CCNA Routing and Switching certification focuses on foundational IP networking skills required to deploy, operate and troubleshoot network layers 1-3. Key topics include:

    • Awareness of programmable network (SDN) architectures
    • Expanded VPN topics to include DMVPN, site-to-site VPN, and client VPN technologies
    • Increased focus on IPv6 routing protocols, configuration, and knowledge
    • Understanding of cloud resources deployed in enterprise network architectures
    • Knowledge of QoS concepts

    Material Contents

    ICND1
    1. Building a Simple Network

    • Functions of Networking
    • Host-to-Host Communications Model
    • Introducing LANs
    • Operating Cisco IOS Software
    • Starting a Switch
    • Ethernet and Switch Operation
    • Troubleshooting Common Switch Media Issues
    2. Establishing Internet Connectivity
    • TCP/IP Internet Layer
    • IP Addressing and Subnets
    • TCP/IP Transport Layer
    • Functions of Routing
    • Configuring a Cisco Router
    • Packet Delivery Process
    • Enabling Static Routing
    • Basics of ACL
    • Enabling Internet Connectivity
    3. Summary Challenge
    • Establish Internet Connectivity
    • Troubleshoot Internet Connectivity
    4. Building a Medium-Sized Network
    • Implementing VLANs and Trunks
    • Routing Between VLANs
    • Using a Cisco IOS Network Device as a DHCP Server
    • Implementing RIPv2
    5. Network Device Management and Security
    • Securing Administrative Access
    • Implementing Device Hardening
    • Configuring System Message Logging
    • Managing Cisco Devices
    • Licensing
    6. Summary Challenge
    • Implementing a Medium-Sized Network
    • Troubleshooting a Medium-Sized Network
    7. Introducing IPv6
    • Introducing Basic IPv6
    • IPv6 Operation
    • Configuring IPv6 Static Routes
    ICND2

      1. Implementing Scalable Medium-Sized Networks
    • Troubleshooting VLAN Connectivity
    • Building Redundant Switched Topologies
    • Improving Redundant Switched Topologies with
    • Layer 3 Redundancy
    2. Troubleshooting Basic Connectivity
    • Troubleshooting IPv4 Network Connectivity
    • Troubleshooting IPv6 Network Connectivity
    3. Implementing an EIGRP-Based Solution
    • Implementing EIGRP
    • Implementing EIGRP for IPv6
    • Troubleshooting EIGRP
    4. Summary Challenge
    • Implementing and Troubleshooting Scalable Medium-Sized Network
    • Implementing and Troubleshooting Scalable Medium-Sized Network
    5. Implement a Scalable OSPF-Based Solution
    • OSPF
    • Implementing Multi-area OSPF IPv4
    • Implementing OSPFv3 for IPv6
    • Troubleshooting Multi-area OSPF
    6. Wide-Area Networks
    • WAN Technologies
    • Understanding Point-to-Point Protocols
    • Configuring GRE Tunnels
    • Configuring Single-Homed EBGP
    7. Network Device Management
    • Implementing Basic Network Device Management and Security
    • Evolution of Intelligent Networks
    • Introducing QoS
    8. Summary Challenge
    • Implementing and Troubleshooting Scalable Multi-area Network
    • Implementing and Troubleshooting Scalable Multi-area Network
     

    Details & Documents

    Documents:
    NA
    Details:
    PREREQUISITES Understanding of network fundamentals, experience implementing local area networks and internet connectivity, experience managing network device security, experience implementing WAN and basic IPv6 connectivity. Understanding Networking Fundamentals
    Network+ Prep Course
    TCP/IP Networking REQUIRED EXAMS Standard Training Path: 100-105 ICND1 200-105 ICND2 RECERTIFICATION Cisco certifications are valid for three years. To recertify, pass one of the following before the certification expiration date:

    Terms & Conditions

    NA

    Refund & Cancellation

    NA

  • Highlights
  • Price

    1,900 (EGP) - Price Including Material

    Days Per week

    2 Days

    Lecture Duration

    5 Hours

    Class Time

    Morning

    Available branches

    Total course hours

    68

    Start date on demand

    Yes

    Start time

    1:00:00 AM

    End time

    1:00:00 AM

    Pace

    Half Day Training

    Accredited by

    cisco international

    Installment

    No

  • Product Details
  • Summary

    The role and skills required of a core network engineer are evolving significantly as enterprise networks encounter increased business demands and technology advancements. To meet these challenges, skilled IT professionals are needed with up-to-date, networking skills. For individuals looking to build and validate Cisco networking fundamentals, the Cisco CCNA Routing and Switching certification focuses on foundational IP networking skills required to deploy, operate and troubleshoot network layers 1-3. Key topics include:

    • Awareness of programmable network (SDN) architectures
    • Expanded VPN topics to include DMVPN, site-to-site VPN, and client VPN technologies
    • Increased focus on IPv6 routing protocols, configuration, and knowledge
    • Understanding of cloud resources deployed in enterprise network architectures
    • Knowledge of QoS concepts

    Material Contents

    ICND1
    1. Building a Simple Network

    • Functions of Networking
    • Host-to-Host Communications Model
    • Introducing LANs
    • Operating Cisco IOS Software
    • Starting a Switch
    • Ethernet and Switch Operation
    • Troubleshooting Common Switch Media Issues
    2. Establishing Internet Connectivity
    • TCP/IP Internet Layer
    • IP Addressing and Subnets
    • TCP/IP Transport Layer
    • Functions of Routing
    • Configuring a Cisco Router
    • Packet Delivery Process
    • Enabling Static Routing
    • Basics of ACL
    • Enabling Internet Connectivity
    3. Summary Challenge
    • Establish Internet Connectivity
    • Troubleshoot Internet Connectivity
    4. Building a Medium-Sized Network
    • Implementing VLANs and Trunks
    • Routing Between VLANs
    • Using a Cisco IOS Network Device as a DHCP Server
    • Implementing RIPv2
    5. Network Device Management and Security
    • Securing Administrative Access
    • Implementing Device Hardening
    • Configuring System Message Logging
    • Managing Cisco Devices
    • Licensing
    6. Summary Challenge
    • Implementing a Medium-Sized Network
    • Troubleshooting a Medium-Sized Network
    7. Introducing IPv6
    • Introducing Basic IPv6
    • IPv6 Operation
    • Configuring IPv6 Static Routes
    ICND2

      1. Implementing Scalable Medium-Sized Networks
    • Troubleshooting VLAN Connectivity
    • Building Redundant Switched Topologies
    • Improving Redundant Switched Topologies with
    • Layer 3 Redundancy
    2. Troubleshooting Basic Connectivity
    • Troubleshooting IPv4 Network Connectivity
    • Troubleshooting IPv6 Network Connectivity
    3. Implementing an EIGRP-Based Solution
    • Implementing EIGRP
    • Implementing EIGRP for IPv6
    • Troubleshooting EIGRP
    4. Summary Challenge
    • Implementing and Troubleshooting Scalable Medium-Sized Network
    • Implementing and Troubleshooting Scalable Medium-Sized Network
    5. Implement a Scalable OSPF-Based Solution
    • OSPF
    • Implementing Multi-area OSPF IPv4
    • Implementing OSPFv3 for IPv6
    • Troubleshooting Multi-area OSPF
    6. Wide-Area Networks
    • WAN Technologies
    • Understanding Point-to-Point Protocols
    • Configuring GRE Tunnels
    • Configuring Single-Homed EBGP
    7. Network Device Management
    • Implementing Basic Network Device Management and Security
    • Evolution of Intelligent Networks
    • Introducing QoS
    8. Summary Challenge
    • Implementing and Troubleshooting Scalable Multi-area Network
    • Implementing and Troubleshooting Scalable Multi-area Network
     

    Details & Documents

    Documents:
    NA
    Details:
    PREREQUISITES Understanding of network fundamentals, experience implementing local area networks and internet connectivity, experience managing network device security, experience implementing WAN and basic IPv6 connectivity. Understanding Networking Fundamentals
    Network+ Prep Course
    TCP/IP Networking REQUIRED EXAMS Standard Training Path: 100-105 ICND1 200-105 ICND2 RECERTIFICATION Cisco certifications are valid for three years. To recertify, pass one of the following before the certification expiration date:

  • Policy Terms
  • Terms & Conditions

    NA

    Refund & Cancellation

    NA

    Read More Details
    MTC
    Photoshop Architecture Design Variable 3 Hours 24 Hours 3 Days AUTODESK Nasr City 1,100 (EGP)
    110.00 EGP
    Cashback
    Price Including Material
    Reserve course Price Including Material
    5313 Views

    Price

    1,100 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    3 Hours

    Class Time

    Evening

    Available branches

    Total course hours

    24

    Start time

    6:00:00 PM

    End time

    9:00:00 PM

    Pace

    Full Day Training

    Accredited by

    AUTODESK

    Installment

    No

    Summary

        Session No. Session Contents 1

    • Enhancing Images
    • Retouch Images
    • Adjust Tonal Range Using Adjustment Layers.
    2
    • Working with Vector Paths
    • Create Vector Paths
    • Edit Paths
    3
    • Applying Custom Fills
    • Create Swatches and Gradients
    • Create Custom Patterns and Brushes
      4
    • Working with Layers
    • Blend Layers
    • Work with Shape Layers
    • Work with Masks
    • Apply Special Effects to a Layer
    5
    • Automating Tasks
    • Work with Actions
    • Automate Tasks in Adobe Bridge
    6
    • Working with Video Files
    • Edit Video Files
    • Export Video Files
        7
    • Integrating with Other Adobe Applications
    • Integrate with Adobe Illustrator
    • Edit a Photoshop File with Adobe Acrobat
      8
    • Photoshop CS4 – L2 Workshops
    • Photoshop CS4 – L2 Project

    Material Contents

        Session No. Session Contents 1

    • Enhancing Images
    • Retouch Images
    • Adjust Tonal Range Using Adjustment Layers.
    2
    • Working with Vector Paths
    • Create Vector Paths
    • Edit Paths
    3
    • Applying Custom Fills
    • Create Swatches and Gradients
    • Create Custom Patterns and Brushes
      4
    • Working with Layers
    • Blend Layers
    • Work with Shape Layers
    • Work with Masks
    • Apply Special Effects to a Layer
    5
    • Automating Tasks
    • Work with Actions
    • Automate Tasks in Adobe Bridge
    6
    • Working with Video Files
    • Edit Video Files
    • Export Video Files
        7
    • Integrating with Other Adobe Applications
    • Integrate with Adobe Illustrator
    • Edit a Photoshop File with Adobe Acrobat
      8
    • Photoshop CS4 – L2 Workshops
    • Photoshop CS4 – L2 Project
     

    Details & Documents

    Documents:
    1. Personal card. 2. University card. 3-The Engineers Syndicate card.
    Details:
                      Session No. Session Contents 1

    • Enhancing Images
    • Retouch Images
    • Adjust Tonal Range Using Adjustment Layers.
    2
    • Working with Vector Paths
    • Create Vector Paths
    • Edit Paths
    3
    • Applying Custom Fills
    • Create Swatches and Gradients
    • Create Custom Patterns and Brushes
      4
    • Working with Layers
    • Blend Layers
    • Work with Shape Layers
    • Work with Masks
    • Apply Special Effects to a Layer
    5
    • Automating Tasks
    • Work with Actions
    • Automate Tasks in Adobe Bridge
    6
    • Working with Video Files
    • Edit Video Files
    • Export Video Files
        7
    • Integrating with Other Adobe Applications
    • Integrate with Adobe Illustrator
    • Edit a Photoshop File with Adobe Acrobat
      8
    • Photoshop CS4 – L2 Workshops
    • Photoshop CS4 – L2 Project
     

    Terms & Conditions

    1 - Registration in the course before the start date of at least 5 days. 2 - You can cancel the reservation at 3 at most before the start of the course. 3- Certificates approved by the Engineers Syndicate and Autodesk International Company. 4- Certificates can not be obtained in case of absence 3 times at most.

    Refund & Cancellation

    Booking Terms: 1 - The course is reserved by paying only 200 Egyptian pounds before the start of the course. 2 - Payment can be made by using cash favon. 3. Payment can be made by using postal order. Recovery Terms: 1 - to cancel the reservation of the course before the beginning of the course of not less than 3 days. 2. If the time limit is not met, the amount of the reservation can not be refunded.

  • Highlights
  • Price

    1,100 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    3 Hours

    Class Time

    Evening

    Available branches

    Total course hours

    24

    Start time

    6:00:00 PM

    End time

    9:00:00 PM

    Pace

    Full Day Training

    Accredited by

    AUTODESK

    Installment

    No

  • Product Details
  • Summary

        Session No. Session Contents 1

    • Enhancing Images
    • Retouch Images
    • Adjust Tonal Range Using Adjustment Layers.
    2
    • Working with Vector Paths
    • Create Vector Paths
    • Edit Paths
    3
    • Applying Custom Fills
    • Create Swatches and Gradients
    • Create Custom Patterns and Brushes
      4
    • Working with Layers
    • Blend Layers
    • Work with Shape Layers
    • Work with Masks
    • Apply Special Effects to a Layer
    5
    • Automating Tasks
    • Work with Actions
    • Automate Tasks in Adobe Bridge
    6
    • Working with Video Files
    • Edit Video Files
    • Export Video Files
        7
    • Integrating with Other Adobe Applications
    • Integrate with Adobe Illustrator
    • Edit a Photoshop File with Adobe Acrobat
      8
    • Photoshop CS4 – L2 Workshops
    • Photoshop CS4 – L2 Project

    Material Contents

        Session No. Session Contents 1

    • Enhancing Images
    • Retouch Images
    • Adjust Tonal Range Using Adjustment Layers.
    2
    • Working with Vector Paths
    • Create Vector Paths
    • Edit Paths
    3
    • Applying Custom Fills
    • Create Swatches and Gradients
    • Create Custom Patterns and Brushes
      4
    • Working with Layers
    • Blend Layers
    • Work with Shape Layers
    • Work with Masks
    • Apply Special Effects to a Layer
    5
    • Automating Tasks
    • Work with Actions
    • Automate Tasks in Adobe Bridge
    6
    • Working with Video Files
    • Edit Video Files
    • Export Video Files
        7
    • Integrating with Other Adobe Applications
    • Integrate with Adobe Illustrator
    • Edit a Photoshop File with Adobe Acrobat
      8
    • Photoshop CS4 – L2 Workshops
    • Photoshop CS4 – L2 Project
     

    Details & Documents

    Documents:
    1. Personal card. 2. University card. 3-The Engineers Syndicate card.
    Details:
                      Session No. Session Contents 1

    • Enhancing Images
    • Retouch Images
    • Adjust Tonal Range Using Adjustment Layers.
    2
    • Working with Vector Paths
    • Create Vector Paths
    • Edit Paths
    3
    • Applying Custom Fills
    • Create Swatches and Gradients
    • Create Custom Patterns and Brushes
      4
    • Working with Layers
    • Blend Layers
    • Work with Shape Layers
    • Work with Masks
    • Apply Special Effects to a Layer
    5
    • Automating Tasks
    • Work with Actions
    • Automate Tasks in Adobe Bridge
    6
    • Working with Video Files
    • Edit Video Files
    • Export Video Files
        7
    • Integrating with Other Adobe Applications
    • Integrate with Adobe Illustrator
    • Edit a Photoshop File with Adobe Acrobat
      8
    • Photoshop CS4 – L2 Workshops
    • Photoshop CS4 – L2 Project
     

  • Policy Terms
  • Terms & Conditions

    1 - Registration in the course before the start date of at least 5 days. 2 - You can cancel the reservation at 3 at most before the start of the course. 3- Certificates approved by the Engineers Syndicate and Autodesk International Company. 4- Certificates can not be obtained in case of absence 3 times at most.

    Refund & Cancellation

    Booking Terms: 1 - The course is reserved by paying only 200 Egyptian pounds before the start of the course. 2 - Payment can be made by using cash favon. 3. Payment can be made by using postal order. Recovery Terms: 1 - to cancel the reservation of the course before the beginning of the course of not less than 3 days. 2. If the time limit is not met, the amount of the reservation can not be refunded.

    Read More Details
    Expert Zone
    Graphic design diploma On Demand 3 Hours 90 Hours 2 Days expert zone Hadayek Al Ahram (6th October) 1,500 (EGP)
    150.00 EGP
    Cashback
    Price Including Material
    Reserve course Price Including Material
    10399 Views

    Price

    1,500 (EGP) - Price Including Material

    Days Per week

    2 Days

    Lecture Duration

    3 Hours

    Class Time

    Morning

    Total course hours

    90

    Start date on demand

    Yes

    Start time

    End time

    Pace

    Half Day Training

    Accredited by

    expert zone

    Installment

    Yes

    Summary

    graphic design diploma
    1-Adobe Photoshop CC
    2-.Adobe illustrator CC
    3-.Adobe In design CC

    Course Description: Students learn and apply fundamentals of various software applications (such as Illustrator and Photoshop,Indesign ) image editing, drawing and graphic animation.Advertising and marketing projects coordinate technical skills with organization, management,communication, ethics and teamwork.
    

    Material Contents

    Course Goals:1. Demonstrate a thorough understanding of the elements of graphic design.2. Read, understand and communicate in the language of graphic design.3. Use technology such as Photoshop, Illustrator, Indesign and Internet Explorer.4. Students will learn to demonstrate positive work behavior.5. Students will learn to solve problems using critical thinking.
    Course Outline:
    Program Area 1: Introduction to the Graphic Design Industry• Students are introduced to the graphic design industry through magazines, internet, etc. We begin to talk about audience.o History of Graphic Design Future of Graphic Design  
    Program Area 2: Introduction to the equipment• Students use multimedia elements to create projects with graphic design software. The introduction of each piece of equipment would be tied to a relevant graphics project.o Computer  Scanner  Camera Digital tablet  Printer Graphic Design
    ●  2
     Program Area 3: Elements of Design• Students learn about design elements through projects such as; creating examples of color schemes using graphic software and creating an original alphabet based on a theme. Each project includes self reflection and a peer review.o Color  Line  Shape  Space  Texture Value
     Program Area 4: Principles of Design• Students learn the principles of design through projects such as; posters, creating original designs that reflect an emotion, magazine covers, product ads, cereal box prototypes, candy wrappers etc. They do a self reflection on their projects and a peer review. Some projects include a presentation to the class.o Balance  Contrast Emphasis/Dominance  Harmony  Movement/Rhythm Proportion  Repetition/Pattern  Unity  Variety
     Program Area 5: Typography• In teams students create a business proposal and create branding for that business including a commercial and magazine ad. They present the product to the class.o Anatomy of a letter  Typefaces  Typographic Measure men  Typographic Standards  Typographic Guidelines Program Area 6: Creating images for print & web• Students learn when to use particular image formats for individual projects. They create collages,logos, Cd covers, etc. Each project includes self reflection and a peer review.o Formats  Resolution  Raster Vs Vector
     Program Area 7: Editing Images• Students use images scanned and from the internet to create projects while learning to cite sources and understand whether or not they can legally use the image.o Ethics copyrights lows  gram Area 8: Leadership• Students will participate in leadership activities such as: perfect attendance, school involvement,volunteering in the community as well as performing other leadership tasks within the classroom,school and community.

    Details & Documents

    graphic design diploma
    1-Adobe Photoshop CC
    2-.Adobe illustrator CC
    3-.Adobe In design CC

    Our goal is to introduce the trainee
     the actual differences in design, it is important to know what type of work you may find yourself doing in each field.
    As a print designer, you may work on:
    • Magazine advertisements
    • Product design and packaging
    • business card
    • Logos

    You're exposed to the work product of professional designers every day. Items ranging from complex advertising campaigns to simple stationery templates start with a designer applying the art and the science of their craft.

    Terms & Conditions


    The number of absences does not exceed 3 times throughout the course of the course

    Refund & Cancellation

    20 % the course price should be paied as registration costs and the rest of the course price should be paied at the start of the first session

    The course value may not be refunded after the beginning of the course

  • Highlights
  • Price

    1,500 (EGP) - Price Including Material

    Days Per week

    2 Days

    Lecture Duration

    3 Hours

    Class Time

    Morning

    Total course hours

    90

    Start date on demand

    Yes

    Start time

    End time

    Pace

    Half Day Training

    Accredited by

    expert zone

    Installment

    Yes

  • Product Details
  • Summary

    graphic design diploma
    1-Adobe Photoshop CC
    2-.Adobe illustrator CC
    3-.Adobe In design CC

    Course Description: Students learn and apply fundamentals of various software applications (such as Illustrator and Photoshop,Indesign ) image editing, drawing and graphic animation.Advertising and marketing projects coordinate technical skills with organization, management,communication, ethics and teamwork.
    

    Material Contents

    Course Goals:1. Demonstrate a thorough understanding of the elements of graphic design.2. Read, understand and communicate in the language of graphic design.3. Use technology such as Photoshop, Illustrator, Indesign and Internet Explorer.4. Students will learn to demonstrate positive work behavior.5. Students will learn to solve problems using critical thinking.
    Course Outline:
    Program Area 1: Introduction to the Graphic Design Industry• Students are introduced to the graphic design industry through magazines, internet, etc. We begin to talk about audience.o History of Graphic Design Future of Graphic Design  
    Program Area 2: Introduction to the equipment• Students use multimedia elements to create projects with graphic design software. The introduction of each piece of equipment would be tied to a relevant graphics project.o Computer  Scanner  Camera Digital tablet  Printer Graphic Design
    ●  2
     Program Area 3: Elements of Design• Students learn about design elements through projects such as; creating examples of color schemes using graphic software and creating an original alphabet based on a theme. Each project includes self reflection and a peer review.o Color  Line  Shape  Space  Texture Value
     Program Area 4: Principles of Design• Students learn the principles of design through projects such as; posters, creating original designs that reflect an emotion, magazine covers, product ads, cereal box prototypes, candy wrappers etc. They do a self reflection on their projects and a peer review. Some projects include a presentation to the class.o Balance  Contrast Emphasis/Dominance  Harmony  Movement/Rhythm Proportion  Repetition/Pattern  Unity  Variety
     Program Area 5: Typography• In teams students create a business proposal and create branding for that business including a commercial and magazine ad. They present the product to the class.o Anatomy of a letter  Typefaces  Typographic Measure men  Typographic Standards  Typographic Guidelines Program Area 6: Creating images for print & web• Students learn when to use particular image formats for individual projects. They create collages,logos, Cd covers, etc. Each project includes self reflection and a peer review.o Formats  Resolution  Raster Vs Vector
     Program Area 7: Editing Images• Students use images scanned and from the internet to create projects while learning to cite sources and understand whether or not they can legally use the image.o Ethics copyrights lows  gram Area 8: Leadership• Students will participate in leadership activities such as: perfect attendance, school involvement,volunteering in the community as well as performing other leadership tasks within the classroom,school and community.

    Details & Documents

    graphic design diploma
    1-Adobe Photoshop CC
    2-.Adobe illustrator CC
    3-.Adobe In design CC

    Our goal is to introduce the trainee
     the actual differences in design, it is important to know what type of work you may find yourself doing in each field.
    As a print designer, you may work on:
    • Magazine advertisements
    • Product design and packaging
    • business card
    • Logos

    You're exposed to the work product of professional designers every day. Items ranging from complex advertising campaigns to simple stationery templates start with a designer applying the art and the science of their craft.

  • Policy Terms
  • Terms & Conditions


    The number of absences does not exceed 3 times throughout the course of the course

    Refund & Cancellation

    20 % the course price should be paied as registration costs and the rest of the course price should be paied at the start of the first session

    The course value may not be refunded after the beginning of the course

    Read More Details
    MTC
    Autocad Civil 3D Variable 4 Hours 30 Hours 3 Days AUTODESK Nasr City 1,850 (EGP)
    185.00 EGP
    Cashback
    Price Including Material
    Reserve course Price Including Material
    4965 Views

    Price

    1,850 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    4 Hours

    Class Time

    Evening

    Available branches

    Total course hours

    30

    Start time

    1:00:00 AM

    End time

    1:00:00 AM

    Pace

    Full Day Training

    Accredited by

    AUTODESK

    Installment

    No

    Summary

      Overview: AutoCAD 3D teaches the fundamentals of 3D modeling teaching you how to:

    • Create models from 2D designs.
    • Create  full working drawings of your 3D models.
    Produce visualization of models      

    Material Contents

    Session Session Contents Creation  

    • Converting 2D drawings to 3D model
    • Viewing the 3D model created
    • Visual styles
    • Basic solid shapes
    Creation
    • Combining shapes to make complex models
    • Editing Solid models
    • Introduction to surfaces
    • Slicing solid models and slicing models
    • Creating a 3D block library
    Visualization  
    • Visual styles nd creating your own
    • Rendering the model
    • Applying materials and creating your own
    • Applying lights, shadows, and reflections
    • Saving the rendered images
    Drawings
    • Creating full working drawings
    • Full orthographic projection
    • Sectioning a view
    • Detail views
    • 3D printing rapid prototyping
    Talking to other CAD software   Step, legs, Catia, Solidworks, etc.

    Details & Documents

    Documents:
    1. Personal card. 2. University card. 3-The Engineers Syndicate card.
    Details:
    Session Session Contents Creation  

    • Converting 2D drawings to 3D model
    • Viewing the 3D model created
    • Visual styles
    • Basic solid shapes
    Creation
    • Combining shapes to make complex models
    • Editing Solid models
    • Introduction to surfaces
    • Slicing solid models and slicing models
    • Creating a 3D block library
    Visualization  
    • Visual styles nd creating your own
    • Rendering the model
    • Applying materials and creating your own
    • Applying lights, shadows, and reflections
    • Saving the rendered images
    Drawings
    • Creating full working drawings
    • Full orthographic projection
    • Sectioning a view
    • Detail views
    • 3D printing rapid prototyping
    Talking to other CAD software   Step, legs, Catia, Solidworks, etc.

    Terms & Conditions

    1 - Registration in the course before the start date of at least 5 days. 2 - You can cancel the reservation at 3 at most before the start of the course. 3- Certificates approved by the Engineers Syndicate and Autodesk International Company. 4- Certificates can not be obtained in case of absence 3 times at most.

    Refund & Cancellation

    Booking Terms: 1 - The course is reserved by paying only 200 Egyptian pounds before the start of the course. 2 - Payment can be made by using cash favon. 3. Payment can be made by using postal order. Recovery Terms: 1 - to cancel the reservation of the course before the beginning of the course of not less than 3 days. 2. If the time limit is not met, the amount of the reservation can not be refunded.

  • Highlights
  • Price

    1,850 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    4 Hours

    Class Time

    Evening

    Available branches

    Total course hours

    30

    Start time

    1:00:00 AM

    End time

    1:00:00 AM

    Pace

    Full Day Training

    Accredited by

    AUTODESK

    Installment

    No

  • Product Details
  • Summary

      Overview: AutoCAD 3D teaches the fundamentals of 3D modeling teaching you how to:

    • Create models from 2D designs.
    • Create  full working drawings of your 3D models.
    Produce visualization of models      

    Material Contents

    Session Session Contents Creation  

    • Converting 2D drawings to 3D model
    • Viewing the 3D model created
    • Visual styles
    • Basic solid shapes
    Creation
    • Combining shapes to make complex models
    • Editing Solid models
    • Introduction to surfaces
    • Slicing solid models and slicing models
    • Creating a 3D block library
    Visualization  
    • Visual styles nd creating your own
    • Rendering the model
    • Applying materials and creating your own
    • Applying lights, shadows, and reflections
    • Saving the rendered images
    Drawings
    • Creating full working drawings
    • Full orthographic projection
    • Sectioning a view
    • Detail views
    • 3D printing rapid prototyping
    Talking to other CAD software   Step, legs, Catia, Solidworks, etc.

    Details & Documents

    Documents:
    1. Personal card. 2. University card. 3-The Engineers Syndicate card.
    Details:
    Session Session Contents Creation  

    • Converting 2D drawings to 3D model
    • Viewing the 3D model created
    • Visual styles
    • Basic solid shapes
    Creation
    • Combining shapes to make complex models
    • Editing Solid models
    • Introduction to surfaces
    • Slicing solid models and slicing models
    • Creating a 3D block library
    Visualization  
    • Visual styles nd creating your own
    • Rendering the model
    • Applying materials and creating your own
    • Applying lights, shadows, and reflections
    • Saving the rendered images
    Drawings
    • Creating full working drawings
    • Full orthographic projection
    • Sectioning a view
    • Detail views
    • 3D printing rapid prototyping
    Talking to other CAD software   Step, legs, Catia, Solidworks, etc.

  • Policy Terms
  • Terms & Conditions

    1 - Registration in the course before the start date of at least 5 days. 2 - You can cancel the reservation at 3 at most before the start of the course. 3- Certificates approved by the Engineers Syndicate and Autodesk International Company. 4- Certificates can not be obtained in case of absence 3 times at most.

    Refund & Cancellation

    Booking Terms: 1 - The course is reserved by paying only 200 Egyptian pounds before the start of the course. 2 - Payment can be made by using cash favon. 3. Payment can be made by using postal order. Recovery Terms: 1 - to cancel the reservation of the course before the beginning of the course of not less than 3 days. 2. If the time limit is not met, the amount of the reservation can not be refunded.

    Read More Details
    Al Ahram Newspaper - AMAC Training Center
    MS SQL Server 2014 for Developers On Demand 4 Hours 40 Hours 3 Days Al Ahram Newspaper - AMAC Training Center Down Town 1,200 (EGP)
    120.00 EGP
    Cashback
    Price Including Material
    Reserve course Price Including Material
    4865 Views

    Price

    1,200 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    4 Hours

    Class Time

    Evening

    Available branches

    Total course hours

    40

    Start date on demand

    Yes

    Start time

    5:00:00 PM

    End time

    9:00:00 PM

    Pace

    Half Day Training

    Accredited by

    Al Ahram Newspaper - AMAC Training Center

    Installment

    Yes

    Summary

    Create and develop databases using MS SQL 2014

    Material Contents

    • Working with Data Types.
    • Designing and Implementing Tables
    • Designing and Implementing Views
    • Planning for SQL Server Indexing
    • Improving Performance through Nonclustered Indexes.
    • Designing and Implementing Stored Procedures.
    • Designing and Implementing User-Defined Functions.
    • Responding to Data Manipulation via Triggers.
    • Merging Data and Passing Tables.
    • Handling Errors in T-SQL Code.
     

    Details & Documents

    Documents:

    • Copy of ID
    • Personal Photo
    • Copy of birth certificate for children under 16 years

    Details:
    Course Benefits
    • Understand the product, its components, and basic configuration.
    • Work with the data types supported by SQL Server.
    • Design and implement tables and work with schemas.
    • Design and implement views and partitioned views.
    • Identify the appropriate table structures and implement clustered indexes and heaps.
    • Design and implement non-clustered indexes, covering indexes, and included columns.
    • Design and implement stored procedures.
    • Implement table types, table valued parameters, and the MERGE statement.
    • Design and implement T-SQL error handling and structured exception handling.
    • Design and implement scalar and table-valued functions.
    • Design and implement constraints.
    • Design and implement triggers.
    • Describe and implement target use cases of SQL CLR integration.
    • Use FOR XML and XPath queries.
    • Describe and use spatial data types in SQL Server.
    • Implementing Table Structures in SQL Server
    • Ensuring Data Integrity through Constraints
    • Implementing Managed Code in SQL Server
    • Storing XML Data in SQL Server
    • Querying XML Data in SQL Server
     

    Terms & Conditions

    • Familiarity with Windows Course.
    • Registration for courses is subject to the conditions for admission and after the payment of the prescribed fees before start of course.
    • If the required number of any of the courses mentioned not completed, it will be postponed if possible or canceled.
    • Special groups can be arranged in coordination with the AMAC Training Center.
    • Apply from Companies:
      • Registration for a course is required to provide a letter stating applying and the willingness of the employer to pay the prescribed fees and the candidate meets the requirements of joining the course.
      • Payment of fees in cash or by check on behalf of "Al-Ahram Organization" - "Public Administration" before the start of the course.
      • If the fees are not paid by the employers, the candidate must pay them at his own expense.
     

    Refund & Cancellation

    • You can unsubscribe at least two days before the start of the course
    • Fees for any course after the start of the course are strictly prohibited

  • Highlights
  • Price

    1,200 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    4 Hours

    Class Time

    Evening

    Available branches

    Total course hours

    40

    Start date on demand

    Yes

    Start time

    5:00:00 PM

    End time

    9:00:00 PM

    Pace

    Half Day Training

    Accredited by

    Al Ahram Newspaper - AMAC Training Center

    Installment

    Yes

  • Product Details
  • Summary

    Create and develop databases using MS SQL 2014

    Material Contents

    • Working with Data Types.
    • Designing and Implementing Tables
    • Designing and Implementing Views
    • Planning for SQL Server Indexing
    • Improving Performance through Nonclustered Indexes.
    • Designing and Implementing Stored Procedures.
    • Designing and Implementing User-Defined Functions.
    • Responding to Data Manipulation via Triggers.
    • Merging Data and Passing Tables.
    • Handling Errors in T-SQL Code.
     

    Details & Documents

    Documents:

    • Copy of ID
    • Personal Photo
    • Copy of birth certificate for children under 16 years

    Details:
    Course Benefits
    • Understand the product, its components, and basic configuration.
    • Work with the data types supported by SQL Server.
    • Design and implement tables and work with schemas.
    • Design and implement views and partitioned views.
    • Identify the appropriate table structures and implement clustered indexes and heaps.
    • Design and implement non-clustered indexes, covering indexes, and included columns.
    • Design and implement stored procedures.
    • Implement table types, table valued parameters, and the MERGE statement.
    • Design and implement T-SQL error handling and structured exception handling.
    • Design and implement scalar and table-valued functions.
    • Design and implement constraints.
    • Design and implement triggers.
    • Describe and implement target use cases of SQL CLR integration.
    • Use FOR XML and XPath queries.
    • Describe and use spatial data types in SQL Server.
    • Implementing Table Structures in SQL Server
    • Ensuring Data Integrity through Constraints
    • Implementing Managed Code in SQL Server
    • Storing XML Data in SQL Server
    • Querying XML Data in SQL Server
     

  • Policy Terms
  • Terms & Conditions

    • Familiarity with Windows Course.
    • Registration for courses is subject to the conditions for admission and after the payment of the prescribed fees before start of course.
    • If the required number of any of the courses mentioned not completed, it will be postponed if possible or canceled.
    • Special groups can be arranged in coordination with the AMAC Training Center.
    • Apply from Companies:
      • Registration for a course is required to provide a letter stating applying and the willingness of the employer to pay the prescribed fees and the candidate meets the requirements of joining the course.
      • Payment of fees in cash or by check on behalf of "Al-Ahram Organization" - "Public Administration" before the start of the course.
      • If the fees are not paid by the employers, the candidate must pay them at his own expense.
     

    Refund & Cancellation

    • You can unsubscribe at least two days before the start of the course
    • Fees for any course after the start of the course are strictly prohibited

    Read More Details
    Al Ahram Newspaper - AMAC Training Center
    PMI Risk Management Professional (PMI-RMP) Variable 60 Minutes 35 Hours 1 Day Project Managment Institute (PMI) Down Town 3,000 (EGP)
    300.00 EGP
    Cashback
    Price Including Material
    Reserve course Price Including Material
    6470 Views

    Price

    3,000 (EGP) - Price Including Material

    Days Per week

    1 Days

    Lecture Duration

    60 Minutes

    Class Time

    Evening

    Available branches

    Total course hours

    35

    Start time

    End time

    Pace

    Half Day Training

    Accredited by

    Project Managment Institute (PMI)

    Summary

    PMI Risk Management Professional Exam Preparation Course

    Material Contents

    • Introduction to Project Risk Management
    • Principles and Concepts
    • Stakeholder Engagement
    • Plan Risk Management
    • Identify Risks
    • Perform Qualitative Risk Analysis
    • Perform Quantitative Risk Analysis
    • Plan Risk Response
    • Monitor and Control Risks
     

    Details & Documents

    Documents:

    • Copy of ID
    • Personal Photo
    • Copy of birth certificate for children under 16 years

    Details:
    • If you have project management experience, this is the class for you.
    • We will help you improve your management expertise to a razor sharp edge with the 10 major project management subject areas.
    • This course prepares you to take the Risk Management Professional (PMI-RMP)® exam
    • This course satisfies the 35-contact hour requirement you need to qualify to take the PMI-RMP ® exam.

    Terms & Conditions

    • Registration for courses is subject to the conditions for admission and after the payment of the prescribed fees before start of course.
    • If the required number of any of the courses mentioned not completed, it will be postponed if possible or canceled.
    • Special groups can be arranged in coordination with the AMAC Training Center.
    • Apply from Companies:
      • Registration for a course is required to provide a letter stating applying and the willingness of the employer to pay the prescribed fees and the candidate meets the requirements of joining the course.
      • Payment of fees in cash or by check on behalf of "Al-Ahram Organization" - "Public Administration" before the start of the course.
      • If the fees are not paid by the employers, the candidate must pay them at his own expense.
     

    Refund & Cancellation

    • You can unsubscribe at least two days before the start of the course
    • Fees for any course after the start of the course are strictly prohibited

  • Highlights
  • Price

    3,000 (EGP) - Price Including Material

    Days Per week

    1 Days

    Lecture Duration

    60 Minutes

    Class Time

    Evening

    Available branches

    Total course hours

    35

    Start time

    End time

    Pace

    Half Day Training

    Accredited by

    Project Managment Institute (PMI)

  • Product Details
  • Summary

    PMI Risk Management Professional Exam Preparation Course

    Material Contents

    • Introduction to Project Risk Management
    • Principles and Concepts
    • Stakeholder Engagement
    • Plan Risk Management
    • Identify Risks
    • Perform Qualitative Risk Analysis
    • Perform Quantitative Risk Analysis
    • Plan Risk Response
    • Monitor and Control Risks
     

    Details & Documents

    Documents:

    • Copy of ID
    • Personal Photo
    • Copy of birth certificate for children under 16 years

    Details:
    • If you have project management experience, this is the class for you.
    • We will help you improve your management expertise to a razor sharp edge with the 10 major project management subject areas.
    • This course prepares you to take the Risk Management Professional (PMI-RMP)® exam
    • This course satisfies the 35-contact hour requirement you need to qualify to take the PMI-RMP ® exam.

  • Policy Terms
  • Terms & Conditions

    • Registration for courses is subject to the conditions for admission and after the payment of the prescribed fees before start of course.
    • If the required number of any of the courses mentioned not completed, it will be postponed if possible or canceled.
    • Special groups can be arranged in coordination with the AMAC Training Center.
    • Apply from Companies:
      • Registration for a course is required to provide a letter stating applying and the willingness of the employer to pay the prescribed fees and the candidate meets the requirements of joining the course.
      • Payment of fees in cash or by check on behalf of "Al-Ahram Organization" - "Public Administration" before the start of the course.
      • If the fees are not paid by the employers, the candidate must pay them at his own expense.
     

    Refund & Cancellation

    • You can unsubscribe at least two days before the start of the course
    • Fees for any course after the start of the course are strictly prohibited

    Read More Details
    Inform IBM
    CCNP Routing and Switching On Demand 4 Hours 80 Hours 2 Days CISCO Heliopolis Branch 4,200 (EGP)
    294.00 EGP
    Cashback
    Price Including Material
    Reserve course Price Including Material
    4509 Views

    Price

    4,200 (EGP) - Price Including Material

    Days Per week

    2 Days

    Lecture Duration

    4 Hours

    Class Time

    Morning

    Available branches

    Total course hours

    80

    Start date on demand

    Yes

    Start time

    End time

    Pace

    Half Day Training

    Accredited by

    CISCO

    Installment

    No

    Summary

    Cisco Certified Network Professional (CCNP) Routing and Switching certification validates that you have the ability to plan, implement, verify and troubleshoot local and wide area enterprise networks and that you can work collaboratively with specialists on advanced security, voice, wireless and video solutions. The CCNP Routing and Switching certification is right for you if you have at least one year of networking experience and you are ready to advance your skills and work independently on complex network solutions. Achieving CCNP Routing and Switching demonstrates the skills required in enterprise roles such as network engineer, support engineer, systems engineer or network technician.  The routing and switching protocol knowledge and skills you'll gain while pursuing this certification provide a lasting foundation. They are equally relevant in the physical networks of today and the virtualized network functions of tomorrow.

    Material Contents

    ROUTE
      1. Basic Network and Routing Concepts

    • Differentiating Routing Protocols
    • Understanding Network Technologies
    • Connecting Remote Locations with the Headquarters
    • Implementing RIPng
    2. EIGRP Implementation
    • Establishing EIGRP Neighbor Relationships
    • Building the EIGRP Topology Table
    • Optimizing EIGRP Behavior
    • Configuring EIGRP for IPv6
    • Discovering Named EIGRP Configuration
    3. OSPF Implementation
    • Establishing OSPF Neighbor Relationship
    • Building the Link State Database
    • Optimizing OSPF Behavior
    • Configuring OSPFv3
    4. Configuration of Redistribution
    • Implementing Basic Routing Protocol Redistribution
    • Manipulating Redistribution Using Route Filtering
    5. Path Control Implementation
    • Using Cisco Express Forwarding Switching
    • Implementing Path Control
    6. Enterprise Internet Connectivity
    • Planning Enterprise Internet Connectivity
    • Establishing Single-Homed IPv4 Internet Connectivity
    • Establishing Single-Homed IPv6 Internet Connectivity
    • Improving Resilience of Internet Connectivity
    • Considering Advantages of Using BGP
    • Implementing Basic BGP Operations
    • Using BGP Attributes and Path Selection Process
    • Controlling BGP Routing Updates
    • Implementing BGP for IPv6 Internet Connectivity
    7. Routers and Routing Protocol Hardening
    • Securing Cisco Routers
    • Describing Routing Protocol Authentication Options
    • Configuring EIGRP Authentication
    • Configuring OSPF Authentication
    • Configuring BGP Authentication
    SWITCH
      1. Basic Concepts and Network Design
    • Analyzing Campus Network Structure
    • Comparing Layer 2 and Multilayer Switches
    • Using Cisco SDM Templates
    • Implementing LLDP
    • Implementing PoE
    2. Campus Network Architecture
    • Implementing VLANs and Trunks
    • Introducing VTP
    • Implementing DHCP
    • Implementing DHCP for IPv6
    • Configuring Layer 2 Port Aggregation
    3. Spanning Tree Implementation
    • Implementing RSTP
    • Implementing STP Stability Mechanisms
    • Implementing Multiple Spanning Tree Protocol
    4. Configuring Inter-VLAN Routing
    • Implementing Inter-VLAN Routing Using a Router
    • Configuring a Switch to Route
    5. Implementing High Availability Networks
    • Configuring Network Time Protocol
    • Implementing SNMP Version 3
    • Implementing IP SLA
    • Implementing Port Mirroring for Monitoring Support
    • Verifying Switch Virtualization
    6. First Hop Redundancy Implementation
    • Configuring Layer 3 Redundancy with HSRP
    • Configuring Layer 3 Redundancy with VRRP
    • Configure VRRP With Load Balancing
    • Configuring Layer 3 Redundancy with GLBP
    • Configuring First Hop Redundancy for IPv6
    7. Campus Network Security
    • Implementing Port Security
    • Implementing Storm Control
    • Implementing Access to External Authentication
    • Mitigating Spoofing Attacks
    • Securing VLAN Trunks
    • Configuring Private VLANs
    TSHOOT
      1. Tools and Methodologies of Troubleshooting
    • Describing Troubleshooting Methodologies
    • Using Troubleshooting Procedures
    • Following Recommended Practices During Routine Network Maintenance
    • Using Basic IOS Troubleshooting Tools
    • Using Specialized Troubleshooting Tools
    2. Troubleshooting at SECHNIK Networking Ltd.
    • Debrief of the each of the three Troubleshooting at SECHNIK Networking Ltd. Labs
    • Troubleshooting issues with trunks, NAT, interfaces, IPv6, network layer connectivity, error-disabled ports, DHCP, passive interfaces
    3. Troubleshooting at TINC Garbage Disposal Ltd.
    • Debrief of the each of the four Troubleshooting at TINC Garbage Disposal Ltd. Labs
    • Troubleshooting issues with BGP neighborship, port security, VLANs, native VLAN, OSPF adjacency, management access, HSRP, routing sources, VRRP, EtherChannel, GLBP, DHCP snooping
    4. Troubleshooting at PILE Forensic Accounting Ltd.
    • Debrief of the each of the five Troubleshooting at PILE Forensic Accounting Ltd. Labs
    • Troubleshooting issues with EIGRP adjacency, BGP filtering and route selection, NTP, inter-VLAN routing, DNS, remote device management, EIGRP named configuration, EIGRP stub, default routes, management plane security.
    5. Troubleshooting at Bank of POLONA Ltd.
    • Debrief of the each of the four Troubleshooting at POLONA Ltd. Labs.
    • Troubleshooting issues with redistribution, FHRP tracking, IP SLA, EIGRP summarization, basic RIPng, ACLs, GRE tunnels, OSPF summarization, AAA, OSPF for IPv6, OSPF stub areas.
    6. Troubleshooting at RADULKO Transport Ltd. (NOTE: this module is not done in class)
    • Debrief of the each of the four Troubleshooting at RADULKO Transport Ltd. Labs.
    • Troubleshooting issues with STP, PBR, CDP, LLDP, VTP, EIGRP for IPv6, MP-BGP, and OSPFv3 address families

    Details & Documents

    Documents:
    NA
    Details:
    REQUIRED EXAMS 300-101 ROUTE 300-115 SWITCH 300-135 TSHOOT

      RECERTIFICATION Cisco professional-level certifications are valid for three years. To recertify you must pass one of the following:

    • The latest exam version for your current certification.
    • Any current CCIE Written Exam.
    • The current CCDE Written Exam or CCDE Practical Exam.
    • The Cisco Certified Architect (CCAr) interview and the CCAr board review.

    Terms & Conditions

    NA

    Refund & Cancellation

    NA

  • Highlights
  • Price

    4,200 (EGP) - Price Including Material

    Days Per week

    2 Days

    Lecture Duration

    4 Hours

    Class Time

    Morning

    Available branches

    Total course hours

    80

    Start date on demand

    Yes

    Start time

    End time

    Pace

    Half Day Training

    Accredited by

    CISCO

    Installment

    No

  • Product Details
  • Summary

    Cisco Certified Network Professional (CCNP) Routing and Switching certification validates that you have the ability to plan, implement, verify and troubleshoot local and wide area enterprise networks and that you can work collaboratively with specialists on advanced security, voice, wireless and video solutions. The CCNP Routing and Switching certification is right for you if you have at least one year of networking experience and you are ready to advance your skills and work independently on complex network solutions. Achieving CCNP Routing and Switching demonstrates the skills required in enterprise roles such as network engineer, support engineer, systems engineer or network technician.  The routing and switching protocol knowledge and skills you'll gain while pursuing this certification provide a lasting foundation. They are equally relevant in the physical networks of today and the virtualized network functions of tomorrow.

    Material Contents

    ROUTE
      1. Basic Network and Routing Concepts

    • Differentiating Routing Protocols
    • Understanding Network Technologies
    • Connecting Remote Locations with the Headquarters
    • Implementing RIPng
    2. EIGRP Implementation
    • Establishing EIGRP Neighbor Relationships
    • Building the EIGRP Topology Table
    • Optimizing EIGRP Behavior
    • Configuring EIGRP for IPv6
    • Discovering Named EIGRP Configuration
    3. OSPF Implementation
    • Establishing OSPF Neighbor Relationship
    • Building the Link State Database
    • Optimizing OSPF Behavior
    • Configuring OSPFv3
    4. Configuration of Redistribution
    • Implementing Basic Routing Protocol Redistribution
    • Manipulating Redistribution Using Route Filtering
    5. Path Control Implementation
    • Using Cisco Express Forwarding Switching
    • Implementing Path Control
    6. Enterprise Internet Connectivity
    • Planning Enterprise Internet Connectivity
    • Establishing Single-Homed IPv4 Internet Connectivity
    • Establishing Single-Homed IPv6 Internet Connectivity
    • Improving Resilience of Internet Connectivity
    • Considering Advantages of Using BGP
    • Implementing Basic BGP Operations
    • Using BGP Attributes and Path Selection Process
    • Controlling BGP Routing Updates
    • Implementing BGP for IPv6 Internet Connectivity
    7. Routers and Routing Protocol Hardening
    • Securing Cisco Routers
    • Describing Routing Protocol Authentication Options
    • Configuring EIGRP Authentication
    • Configuring OSPF Authentication
    • Configuring BGP Authentication
    SWITCH
      1. Basic Concepts and Network Design
    • Analyzing Campus Network Structure
    • Comparing Layer 2 and Multilayer Switches
    • Using Cisco SDM Templates
    • Implementing LLDP
    • Implementing PoE
    2. Campus Network Architecture
    • Implementing VLANs and Trunks
    • Introducing VTP
    • Implementing DHCP
    • Implementing DHCP for IPv6
    • Configuring Layer 2 Port Aggregation
    3. Spanning Tree Implementation
    • Implementing RSTP
    • Implementing STP Stability Mechanisms
    • Implementing Multiple Spanning Tree Protocol
    4. Configuring Inter-VLAN Routing
    • Implementing Inter-VLAN Routing Using a Router
    • Configuring a Switch to Route
    5. Implementing High Availability Networks
    • Configuring Network Time Protocol
    • Implementing SNMP Version 3
    • Implementing IP SLA
    • Implementing Port Mirroring for Monitoring Support
    • Verifying Switch Virtualization
    6. First Hop Redundancy Implementation
    • Configuring Layer 3 Redundancy with HSRP
    • Configuring Layer 3 Redundancy with VRRP
    • Configure VRRP With Load Balancing
    • Configuring Layer 3 Redundancy with GLBP
    • Configuring First Hop Redundancy for IPv6
    7. Campus Network Security
    • Implementing Port Security
    • Implementing Storm Control
    • Implementing Access to External Authentication
    • Mitigating Spoofing Attacks
    • Securing VLAN Trunks
    • Configuring Private VLANs
    TSHOOT
      1. Tools and Methodologies of Troubleshooting
    • Describing Troubleshooting Methodologies
    • Using Troubleshooting Procedures
    • Following Recommended Practices During Routine Network Maintenance
    • Using Basic IOS Troubleshooting Tools
    • Using Specialized Troubleshooting Tools
    2. Troubleshooting at SECHNIK Networking Ltd.
    • Debrief of the each of the three Troubleshooting at SECHNIK Networking Ltd. Labs
    • Troubleshooting issues with trunks, NAT, interfaces, IPv6, network layer connectivity, error-disabled ports, DHCP, passive interfaces
    3. Troubleshooting at TINC Garbage Disposal Ltd.
    • Debrief of the each of the four Troubleshooting at TINC Garbage Disposal Ltd. Labs
    • Troubleshooting issues with BGP neighborship, port security, VLANs, native VLAN, OSPF adjacency, management access, HSRP, routing sources, VRRP, EtherChannel, GLBP, DHCP snooping
    4. Troubleshooting at PILE Forensic Accounting Ltd.
    • Debrief of the each of the five Troubleshooting at PILE Forensic Accounting Ltd. Labs
    • Troubleshooting issues with EIGRP adjacency, BGP filtering and route selection, NTP, inter-VLAN routing, DNS, remote device management, EIGRP named configuration, EIGRP stub, default routes, management plane security.
    5. Troubleshooting at Bank of POLONA Ltd.
    • Debrief of the each of the four Troubleshooting at POLONA Ltd. Labs.
    • Troubleshooting issues with redistribution, FHRP tracking, IP SLA, EIGRP summarization, basic RIPng, ACLs, GRE tunnels, OSPF summarization, AAA, OSPF for IPv6, OSPF stub areas.
    6. Troubleshooting at RADULKO Transport Ltd. (NOTE: this module is not done in class)
    • Debrief of the each of the four Troubleshooting at RADULKO Transport Ltd. Labs.
    • Troubleshooting issues with STP, PBR, CDP, LLDP, VTP, EIGRP for IPv6, MP-BGP, and OSPFv3 address families

    Details & Documents

    Documents:
    NA
    Details:
    REQUIRED EXAMS 300-101 ROUTE 300-115 SWITCH 300-135 TSHOOT

      RECERTIFICATION Cisco professional-level certifications are valid for three years. To recertify you must pass one of the following:

    • The latest exam version for your current certification.
    • Any current CCIE Written Exam.
    • The current CCDE Written Exam or CCDE Practical Exam.
    • The Cisco Certified Architect (CCAr) interview and the CCAr board review.

  • Policy Terms
  • Terms & Conditions

    NA

    Refund & Cancellation

    NA

    Read More Details
    New Horizons
    CIVND2 - Implementing Cisco Video Network Devices, Part 2 v1.0 Variable 9 Hours 40 Hours 5 Days Cisco & New Horizons 4 Branches 18,500 (EGP)
    925.00 EGP
    Cashback
    Price Including Material
    Reserve course Price Including Material
    3730 Views

    Price

    18,500 (EGP) - Price Including Material

    Days Per week

    5 Days

    Lecture Duration

    9 Hours

    Class Time

    Morning

    Total course hours

    40

    Start time

    End time

    Pace

    Full Day Training

    Accredited by

    Cisco & New Horizons

    Installment

    No

    Summary

    The Implementing Cisco Video Network Devices, Part 2 (CVIND2) course will provide students with the necessary knowledge and skills to implement various Cisco Collaboration endpoints in converged Cisco infrastructures. It covers a range of Cisco Collaboration solutions and enables students to implement and troubleshoot Cisco Unified Communication This course also introduces a new type of lab called a Discovery lab. Discovery labs are a learning environment, embedded in the lessons, that enables students to learn about principles and technology in a more interactive, hands-on way.

    Course Outline
    Module 1: Describe the components and architectures of Cisco Business Video solutions
    Module 2: Implement Cisco Collaboration endpoints
    Module 3: Implement Cisco TelePresence endpoints
    Module 4: Implement multipoint conferencing on Cisco Collaboration endpoints
    Module 5: Implement Cisco Digital Media Players

    Material Contents

    N/A

    Details & Documents

    -  Working knowledge of basic IP networking
    - Knowledge of video conferencing and streaming fundamentals

    Terms & Conditions

    -All prices are for training inside Great Cairo and for Egyptian trainees.
    -Training will be held at New Horizons' branches.
    -New Horizons Cairo must receive confirmation at least three weeks before the course start date.
    -Payment: 100% in advance before course start date at least 2 weeks otherwise we will cancel the registration.
    -New Horizons Cairo reserves the right to cancel or reschedule any course with prior notice due to circumstances beyond its control without any liability on its part. Customers will be refunded for cancelled courses which they have already prepaid upon request.
    -All trainees accept and understand that they have read and agreed on the requirements, pre-requisites and outlines of the course.
    -Cancellation requests must be at least 2 weeks before the course start date, otherwise they will not refund the payment.
    -No course cancellations will be accepted within the 2 weeks before the course start date.
    -"No shows" will be due for payment in full and no refund.

    Refund & Cancellation

    -Cancellation requests must be at least 2 weeks before the course start date, otherwise they will not refund the payment.
    -No course cancellations will be accepted within the 2 weeks before the course start date.
    -"No shows" will be due for payment in full and no refund.

  • Highlights
  • Price

    18,500 (EGP) - Price Including Material

    Days Per week

    5 Days

    Lecture Duration

    9 Hours

    Class Time

    Morning

    Total course hours

    40

    Start time

    End time

    Pace

    Full Day Training

    Accredited by

    Cisco & New Horizons

    Installment

    No

  • Product Details
  • Summary

    The Implementing Cisco Video Network Devices, Part 2 (CVIND2) course will provide students with the necessary knowledge and skills to implement various Cisco Collaboration endpoints in converged Cisco infrastructures. It covers a range of Cisco Collaboration solutions and enables students to implement and troubleshoot Cisco Unified Communication This course also introduces a new type of lab called a Discovery lab. Discovery labs are a learning environment, embedded in the lessons, that enables students to learn about principles and technology in a more interactive, hands-on way.

    Course Outline
    Module 1: Describe the components and architectures of Cisco Business Video solutions
    Module 2: Implement Cisco Collaboration endpoints
    Module 3: Implement Cisco TelePresence endpoints
    Module 4: Implement multipoint conferencing on Cisco Collaboration endpoints
    Module 5: Implement Cisco Digital Media Players

    Material Contents

    N/A

    Details & Documents

    -  Working knowledge of basic IP networking
    - Knowledge of video conferencing and streaming fundamentals

  • Policy Terms
  • Terms & Conditions

    -All prices are for training inside Great Cairo and for Egyptian trainees.
    -Training will be held at New Horizons' branches.
    -New Horizons Cairo must receive confirmation at least three weeks before the course start date.
    -Payment: 100% in advance before course start date at least 2 weeks otherwise we will cancel the registration.
    -New Horizons Cairo reserves the right to cancel or reschedule any course with prior notice due to circumstances beyond its control without any liability on its part. Customers will be refunded for cancelled courses which they have already prepaid upon request.
    -All trainees accept and understand that they have read and agreed on the requirements, pre-requisites and outlines of the course.
    -Cancellation requests must be at least 2 weeks before the course start date, otherwise they will not refund the payment.
    -No course cancellations will be accepted within the 2 weeks before the course start date.
    -"No shows" will be due for payment in full and no refund.

    Refund & Cancellation

    -Cancellation requests must be at least 2 weeks before the course start date, otherwise they will not refund the payment.
    -No course cancellations will be accepted within the 2 weeks before the course start date.
    -"No shows" will be due for payment in full and no refund.

    Read More Details
    Inform IBM
    Microsoft Office Fundamentals On Demand 3 Hours 60 Hours 3 Days Inform IBM Heliopolis Branch 1,400 (EGP)
    98.00 EGP
    Cashback
    Price Including Material
    Reserve course Price Including Material
    2991 Views

    Price

    1,400 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    3 Hours

    Class Time

    Morning

    Available branches

    Total course hours

    60

    Start date on demand

    Yes

    Start time

    10:30:00 AM

    End time

    1:30:00 PM

    Pace

    Half Day Training

    Accredited by

    Inform IBM

    Installment

    No

    Summary

    It is designed for learners with some knowledge of computers who wish to gain further practical skills in the most popular Microsoft Office software packages: Word, Excel, PowerPoint, and Access...etc

    Material Contents

    About this course

    This program will familiarize the learner with the powerful features of an electronic office.
    It is designed for learners with some knowledge of computers who wish to gain further practical skills in the most popular Microsoft Office software packages: Word, Excel, PowerPoint, and Access.
    Program Outline

    MS Windows 

    • Basic IT concepts
    • What’s new in Windows
    • Windows interface and navigation
    • Using Windows Apps
    • Desktop Applications
    • Files and folders
    • Customizing environments
    • Features, Help and tips

    MS Word

    • Microsoft Word interface and navigation
    • Customizing your work-space
    • Editing a document (basic formatting)
    • Formatting text and paragraphs
    • Adding tables
    • Managing lists
    • Inserting objects, images and symbols
    • Proofing and printing documents

    MS Excel

    • Microsoft Excel interface and navigation
    • Performing calculations
    • Modifying a Worksheet and Workbook
    • Formatting a Worksheet
    • Printing Workbooks
    • Managing Workbooks
    • Write formulas
    • Edit data, move and copy text and formulas
    • Creating charts and working with formulas as well as filtering and sorting data

    MS PowerPoint

    • Microsoft PowerPoint interface & navigation
    • Developing a PowerPoint presentation
    • Advanced text editing and animation
    • Graphic elements & objects, tables and Charts

    MS Access

    • Key concepts and Terminology
    • Designing a database and documentation
    • Working with existing databases (navigating, adding and editing data)
    • Creating a flat-file & relational database
    • Working with and creating Tables
    • Creating basic forms and subforms
    • Creating and editing Queries (including calculated queries)
    • Creating and editing Reports
    • Creating mailing labels

    Details & Documents

    About this course

    This program will familiarize the learner with the powerful features of an electronic office.
    It is designed for learners with some knowledge of computers who wish to gain further practical skills in the most popular Microsoft Office software packages: Word, Excel, PowerPoint, and Access.
    Program Outline

    MS Windows 

    • Basic IT concepts
    • What’s new in Windows
    • Windows interface and navigation
    • Using Windows Apps
    • Desktop Applications
    • Files and folders
    • Customizing environments
    • Features, Help and tips

    MS Word

    • Microsoft Word interface and navigation
    • Customizing your work-space
    • Editing a document (basic formatting)
    • Formatting text and paragraphs
    • Adding tables
    • Managing lists
    • Inserting objects, images and symbols
    • Proofing and printing documents

    MS Excel

    • Microsoft Excel interface and navigation
    • Performing calculations
    • Modifying a Worksheet and Workbook
    • Formatting a Worksheet
    • Printing Workbooks
    • Managing Workbooks
    • Write formulas
    • Edit data, move and copy text and formulas
    • Creating charts and working with formulas as well as filtering and sorting data

    MS PowerPoint

    • Microsoft PowerPoint interface & navigation
    • Developing a PowerPoint presentation
    • Advanced text editing and animation
    • Graphic elements & objects, tables and Charts

    MS Access

    • Key concepts and Terminology
    • Designing a database and documentation
    • Working with existing databases (navigating, adding and editing data)
    • Creating a flat-file & relational database
    • Working with and creating Tables
    • Creating basic forms and subforms
    • Creating and editing Queries (including calculated queries)
    • Creating and editing Reports
    • Creating mailing labels

    Terms & Conditions

    NA

    Refund & Cancellation

    NA

  • Highlights
  • Price

    1,400 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    3 Hours

    Class Time

    Morning

    Available branches

    Total course hours

    60

    Start date on demand

    Yes

    Start time

    10:30:00 AM

    End time

    1:30:00 PM

    Pace

    Half Day Training

    Accredited by

    Inform IBM

    Installment

    No

  • Product Details
  • Summary

    It is designed for learners with some knowledge of computers who wish to gain further practical skills in the most popular Microsoft Office software packages: Word, Excel, PowerPoint, and Access...etc

    Material Contents

    About this course

    This program will familiarize the learner with the powerful features of an electronic office.
    It is designed for learners with some knowledge of computers who wish to gain further practical skills in the most popular Microsoft Office software packages: Word, Excel, PowerPoint, and Access.
    Program Outline

    MS Windows 

    • Basic IT concepts
    • What’s new in Windows
    • Windows interface and navigation
    • Using Windows Apps
    • Desktop Applications
    • Files and folders
    • Customizing environments
    • Features, Help and tips

    MS Word

    • Microsoft Word interface and navigation
    • Customizing your work-space
    • Editing a document (basic formatting)
    • Formatting text and paragraphs
    • Adding tables
    • Managing lists
    • Inserting objects, images and symbols
    • Proofing and printing documents

    MS Excel

    • Microsoft Excel interface and navigation
    • Performing calculations
    • Modifying a Worksheet and Workbook
    • Formatting a Worksheet
    • Printing Workbooks
    • Managing Workbooks
    • Write formulas
    • Edit data, move and copy text and formulas
    • Creating charts and working with formulas as well as filtering and sorting data

    MS PowerPoint

    • Microsoft PowerPoint interface & navigation
    • Developing a PowerPoint presentation
    • Advanced text editing and animation
    • Graphic elements & objects, tables and Charts

    MS Access

    • Key concepts and Terminology
    • Designing a database and documentation
    • Working with existing databases (navigating, adding and editing data)
    • Creating a flat-file & relational database
    • Working with and creating Tables
    • Creating basic forms and subforms
    • Creating and editing Queries (including calculated queries)
    • Creating and editing Reports
    • Creating mailing labels

    Details & Documents

    About this course

    This program will familiarize the learner with the powerful features of an electronic office.
    It is designed for learners with some knowledge of computers who wish to gain further practical skills in the most popular Microsoft Office software packages: Word, Excel, PowerPoint, and Access.
    Program Outline

    MS Windows 

    • Basic IT concepts
    • What’s new in Windows
    • Windows interface and navigation
    • Using Windows Apps
    • Desktop Applications
    • Files and folders
    • Customizing environments
    • Features, Help and tips

    MS Word

    • Microsoft Word interface and navigation
    • Customizing your work-space
    • Editing a document (basic formatting)
    • Formatting text and paragraphs
    • Adding tables
    • Managing lists
    • Inserting objects, images and symbols
    • Proofing and printing documents

    MS Excel

    • Microsoft Excel interface and navigation
    • Performing calculations
    • Modifying a Worksheet and Workbook
    • Formatting a Worksheet
    • Printing Workbooks
    • Managing Workbooks
    • Write formulas
    • Edit data, move and copy text and formulas
    • Creating charts and working with formulas as well as filtering and sorting data

    MS PowerPoint

    • Microsoft PowerPoint interface & navigation
    • Developing a PowerPoint presentation
    • Advanced text editing and animation
    • Graphic elements & objects, tables and Charts

    MS Access

    • Key concepts and Terminology
    • Designing a database and documentation
    • Working with existing databases (navigating, adding and editing data)
    • Creating a flat-file & relational database
    • Working with and creating Tables
    • Creating basic forms and subforms
    • Creating and editing Queries (including calculated queries)
    • Creating and editing Reports
    • Creating mailing labels

  • Policy Terms
  • Terms & Conditions

    NA

    Refund & Cancellation

    NA

    Read More Details
    Inform IBM
    Adobe Photoshop Core & Advanced- 20% Off On Demand 3 Hours 27 Hours 3 Days Inform IBM Heliopolis Branch 1,500 (EGP)
    105.00 EGP
    Cashback
    Price Including Material
    Reserve course Price Including Material
    6293 Views

    Price

    1,500 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    3 Hours

    Class Time

    Morning

    Available branches

    Total course hours

    27

    Start date on demand

    Yes

    Start time

    End time

    Pace

    Half Day Training

    Accredited by

    Inform IBM

    Installment

    No

    Summary

    What you will learn
    Audience will learn how to take photographs to the next creative level by combining images in Photoshop. This course covers multiple compositing scenarios, including portraits and architecture photos, from selecting the images, to blending photos with layer masks and blend modes, and resizing and sharpening the results. Also covers tips and tricks design to inspire and increase the drama and interest of photographs.

    Material Contents

    Chapter 1: INTRODUCTION TO ADOBE PHOTOSHOP
    Chapter 2: EXPLORING ADOBE BRIDGE
     Browsing Images in Bridge
     Metadata, Keywords & Filters
     Building Collections & Smart Collections
     Moving, Copying & Renaming Images
    Chapter 3: RESIZING & CROPPING IMAGES
     Understanding Pixels & Resolution
     The Image Size Command
     Interpolation Options
     Resizing for Print & Web
     Cropping & Straightening an Image
     Adjusting Canvas Size & Canvas Rotation
    Chapter 4: WORKING WITH BASIC SELECTIONS
     Selecting with the Elliptical Marquee Tool
     Using the Magic Wand & Free Transform Tool
     Selecting with the Regular & Polygonal Lasso Tools
     Combining Selections
     Using the Magnetic Lasso Tool
     Using the Quick Selection Tool & Refine Edge
     Modifying Selections
    Chapter 5: GETTING STARTED WITH LAYERS
    Understanding the Background Layer
     Creating, Selecting, Linking & Deleting Layers
     Locking & Merging Layers
     Copying Layers, Using Perspective & Layer Styles
     Filling & Grouping Layers
     Introduction to Blending Modes
     Blending Modes, Opacity & Fill
     Creating & Modifying Text
     Advanced Topics.
    Chapter 6: PAINTING IN PHOTOSHOP
     Using the Brush Tool
     Working with Colors & Swatches
     Creating & Using Gradients
     Creating & Working with Brushes
     Using the Pencil & Eraser Tools
     Painting with Selections
    Chapter 7: PHOTO RETOUCHING
     The Red Eye Tool
     The Clone Stamp Tool
     The Patch Tool & the Healing Brush Tool
     The Spot Healing Brush Tool
     The Color Replacement Tool
     The Toning & Focus Tools
     Painting with History
     Advanced Topics.
    Chapter 8: INTRODUCTION TO COLOR CORRECTION
     Color Spaces & Color Modes
    The Variations Command
     The Auto Commands
     Adjusting Levels
     Adjust Curves, Non-Destructively, with Adjustment Layers
    Chapter 9: USING QUICK MASK MODE
     Quick Mask Options
     Painting a Selection
     Saving & Removing a Selection from the Background
     Advanced Topics.
    Chapter 10: WORKING WITH THE PEN TOOL
     Understanding Paths & the Pen Tool
     Creating Straight & Curved Paths
     Creating Combo Paths
     Creating a Clipping Path
    Chapter 11: CREATING SPECIAL EFFECTS
     Getting Started with Photoshop Filters
     Smart Filters
     Creating Text Effects
     Applying Gradients to Text
     Advanced Topics.
    Chapter 12: EXPORTING YOUR WORK
     Saving with Different File Formats
     Saving for Web & Devices
     Printing Options
     Credits
     Advanced Topics
    ADVANCED PHOTOSHOP :
    ADVANCED SELECTION TECHNIQUES
     ADVANCED PHOTO RETOUCHING
     TONAL / COLOR CORRECTION
     NEW FILTERS
     NEW CS6 VECTOR DRAWING
     DEALING WITH 3D
     CREATING PDF PRESENTATION
     WORKING WITH CAMERA RAW
     ANIMATING OBJECTS & EFFECTS
     VIDEO & AUDIO MONTAGE
     PHOTOSHOP FOR WEB
     ADVERTISING CONCEPTS
     APPLICATIONS

    Details & Documents

    • Working with Smart Objects
    • Warping and creative transformations
    • Reshaping images with Liquify
    • Using filters, including blur and patterns
    • Creating and modifying shapes
    • Applying blend modes
    • Applying layer effects and layer styles
    • Working with type and fonts
    • Painting in Photoshop
    • Using and sharing libraries
    • Taking advantage of artboards
    • Exporting and sharing Photoshop files

    Terms & Conditions

    NA

    Refund & Cancellation

    NA

  • Highlights
  • Price

    1,500 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    3 Hours

    Class Time

    Morning

    Available branches

    Total course hours

    27

    Start date on demand

    Yes

    Start time

    End time

    Pace

    Half Day Training

    Accredited by

    Inform IBM

    Installment

    No

  • Product Details
  • Summary

    What you will learn
    Audience will learn how to take photographs to the next creative level by combining images in Photoshop. This course covers multiple compositing scenarios, including portraits and architecture photos, from selecting the images, to blending photos with layer masks and blend modes, and resizing and sharpening the results. Also covers tips and tricks design to inspire and increase the drama and interest of photographs.

    Material Contents

    Chapter 1: INTRODUCTION TO ADOBE PHOTOSHOP
    Chapter 2: EXPLORING ADOBE BRIDGE
     Browsing Images in Bridge
     Metadata, Keywords & Filters
     Building Collections & Smart Collections
     Moving, Copying & Renaming Images
    Chapter 3: RESIZING & CROPPING IMAGES
     Understanding Pixels & Resolution
     The Image Size Command
     Interpolation Options
     Resizing for Print & Web
     Cropping & Straightening an Image
     Adjusting Canvas Size & Canvas Rotation
    Chapter 4: WORKING WITH BASIC SELECTIONS
     Selecting with the Elliptical Marquee Tool
     Using the Magic Wand & Free Transform Tool
     Selecting with the Regular & Polygonal Lasso Tools
     Combining Selections
     Using the Magnetic Lasso Tool
     Using the Quick Selection Tool & Refine Edge
     Modifying Selections
    Chapter 5: GETTING STARTED WITH LAYERS
    Understanding the Background Layer
     Creating, Selecting, Linking & Deleting Layers
     Locking & Merging Layers
     Copying Layers, Using Perspective & Layer Styles
     Filling & Grouping Layers
     Introduction to Blending Modes
     Blending Modes, Opacity & Fill
     Creating & Modifying Text
     Advanced Topics.
    Chapter 6: PAINTING IN PHOTOSHOP
     Using the Brush Tool
     Working with Colors & Swatches
     Creating & Using Gradients
     Creating & Working with Brushes
     Using the Pencil & Eraser Tools
     Painting with Selections
    Chapter 7: PHOTO RETOUCHING
     The Red Eye Tool
     The Clone Stamp Tool
     The Patch Tool & the Healing Brush Tool
     The Spot Healing Brush Tool
     The Color Replacement Tool
     The Toning & Focus Tools
     Painting with History
     Advanced Topics.
    Chapter 8: INTRODUCTION TO COLOR CORRECTION
     Color Spaces & Color Modes
    The Variations Command
     The Auto Commands
     Adjusting Levels
     Adjust Curves, Non-Destructively, with Adjustment Layers
    Chapter 9: USING QUICK MASK MODE
     Quick Mask Options
     Painting a Selection
     Saving & Removing a Selection from the Background
     Advanced Topics.
    Chapter 10: WORKING WITH THE PEN TOOL
     Understanding Paths & the Pen Tool
     Creating Straight & Curved Paths
     Creating Combo Paths
     Creating a Clipping Path
    Chapter 11: CREATING SPECIAL EFFECTS
     Getting Started with Photoshop Filters
     Smart Filters
     Creating Text Effects
     Applying Gradients to Text
     Advanced Topics.
    Chapter 12: EXPORTING YOUR WORK
     Saving with Different File Formats
     Saving for Web & Devices
     Printing Options
     Credits
     Advanced Topics
    ADVANCED PHOTOSHOP :
    ADVANCED SELECTION TECHNIQUES
     ADVANCED PHOTO RETOUCHING
     TONAL / COLOR CORRECTION
     NEW FILTERS
     NEW CS6 VECTOR DRAWING
     DEALING WITH 3D
     CREATING PDF PRESENTATION
     WORKING WITH CAMERA RAW
     ANIMATING OBJECTS & EFFECTS
     VIDEO & AUDIO MONTAGE
     PHOTOSHOP FOR WEB
     ADVERTISING CONCEPTS
     APPLICATIONS

    Details & Documents

    • Working with Smart Objects
    • Warping and creative transformations
    • Reshaping images with Liquify
    • Using filters, including blur and patterns
    • Creating and modifying shapes
    • Applying blend modes
    • Applying layer effects and layer styles
    • Working with type and fonts
    • Painting in Photoshop
    • Using and sharing libraries
    • Taking advantage of artboards
    • Exporting and sharing Photoshop files

  • Policy Terms
  • Terms & Conditions

    NA

    Refund & Cancellation

    NA

    Read More Details
    Inform IBM
    CCNA Wireless On Demand 5 Hours 36 Hours 3 Days Inform IBM Heliopolis Branch 5,500 (EGP)
    385.00 EGP
    Cashback
    Material price 40 (EGP)
    Reserve course Material price 40 (EGP)
    4574 Views

    Price

    5,500 (EGP) - 40 (EGP) Material price

    Days Per week

    3 Days

    Lecture Duration

    5 Hours

    Class Time

    Evening

    Available branches

    Total course hours

    36

    Start date on demand

    Yes

    Start time

    5:00:00 PM

    End time

    10:00:00 PM

    Pace

    Half Day Training

    Accredited by

    Inform IBM

    Installment

    No

    Summary

    The growth of wireless network technologies places increased demands on networks and the professionals who support them. Ensuring that this technology is optimally configured, monitored and supported is paramount to achieving positive business outcomes and requires a workforce of skilled wireless professionals. Earning the Cisco CCNA Wireless certification validates your understanding of wireless LAN configuration, monitoring, troubleshooting and the support skills to ensure optimal performance of Cisco Wireless networks.

    Material Contents

    1. Wireless Fundamentals

    • RF Principles
    • RF Mathematics
    • Antenna Characteristics
    • Basics of Spread Spectrum
    • Wireless Media Access
    • Wireless Governance
    2. Security and Client Access
    • Wireless Security Components
    • 802.11 Security
    • 802.1X/EAP Framework
    • EAP Authentication
    • WPA and WPA2 Security
    • Provide Guest Access
    • Native Operating Systems for WLAN Connectivity
    • Configure Smart Handheld Clients
    3. Define the Cisco Wireless Network Architecture
    • Cisco Wireless Network Deployment Options
    • One Management
    • Cisco One Network
    • Mobility Architecture Concepts
    • Optimize RF Conditions and Performance for Clients
    • Layer 2 Infrastructure Support
    • Protocols Used in Wired Infrastructure to Support Wireless
    4. Implement Centralized Wireless Access
    • Initialize a Centralized WLC
    • AP Initialization
    • Explore Additional WLC Features
    • Implement IPv6 in a Cisco Wireless Environment
    • Configure Client Access
    • Implement Roaming in the Centralized Architecture
    5. Implement Converged Wireless Access
    • Initialize a Converged WCM
    • AP Connectivity
    • Explore Additional Wireless Features
    • Configure Client Access
    • Implement Roaming in the Converged Architecture
    6. Implement Small and Remote Wireless Access
    • FlexConnect Architecture
    • Autonomous Architecture
    • Cloud Architecture
    7. WLAN Maintenance and Troubleshooting
    • Wireless Maintenance
    • Troubleshooting Tools
    • Troubleshooting Methodology
    8. WLAN Design
    • Predictive WLAN Design Process
    • WLAN Site Survey Process
     

    Details & Documents

    Documents:
    NA
    Details:
    REQUIRED EXAMS 200-355 WIFUND PREREQUISITES ICND1 or CCENT certification, plus ICND2
    Foundational knowledge of 802.11 wireless network technologies
    ICND1 v3.0 - Interconnecting Cisco Networking Devices, Part 1
    ICND2 v3.0 - Interconnecting Cisco Networking Devices, Part 2
    Enterprise Wi-Fi Administration (CWNA) WHO SHOULD ATTEND Network engineers, network administrators, network managers, and system engineers
    WLAN designers, planners, implementers, and optimizers
    Anyone wishing to attain CCNA Wireless or CCNP Wireless certification
     

    Terms & Conditions

    NA

    Refund & Cancellation

    NA

  • Highlights
  • Price

    5,500 (EGP) - 40 (EGP) Material price

    Days Per week

    3 Days

    Lecture Duration

    5 Hours

    Class Time

    Evening

    Available branches

    Total course hours

    36

    Start date on demand

    Yes

    Start time

    5:00:00 PM

    End time

    10:00:00 PM

    Pace

    Half Day Training

    Accredited by

    Inform IBM

    Installment

    No

  • Product Details
  • Summary

    The growth of wireless network technologies places increased demands on networks and the professionals who support them. Ensuring that this technology is optimally configured, monitored and supported is paramount to achieving positive business outcomes and requires a workforce of skilled wireless professionals. Earning the Cisco CCNA Wireless certification validates your understanding of wireless LAN configuration, monitoring, troubleshooting and the support skills to ensure optimal performance of Cisco Wireless networks.

    Material Contents

    1. Wireless Fundamentals

    • RF Principles
    • RF Mathematics
    • Antenna Characteristics
    • Basics of Spread Spectrum
    • Wireless Media Access
    • Wireless Governance
    2. Security and Client Access
    • Wireless Security Components
    • 802.11 Security
    • 802.1X/EAP Framework
    • EAP Authentication
    • WPA and WPA2 Security
    • Provide Guest Access
    • Native Operating Systems for WLAN Connectivity
    • Configure Smart Handheld Clients
    3. Define the Cisco Wireless Network Architecture
    • Cisco Wireless Network Deployment Options
    • One Management
    • Cisco One Network
    • Mobility Architecture Concepts
    • Optimize RF Conditions and Performance for Clients
    • Layer 2 Infrastructure Support
    • Protocols Used in Wired Infrastructure to Support Wireless
    4. Implement Centralized Wireless Access
    • Initialize a Centralized WLC
    • AP Initialization
    • Explore Additional WLC Features
    • Implement IPv6 in a Cisco Wireless Environment
    • Configure Client Access
    • Implement Roaming in the Centralized Architecture
    5. Implement Converged Wireless Access
    • Initialize a Converged WCM
    • AP Connectivity
    • Explore Additional Wireless Features
    • Configure Client Access
    • Implement Roaming in the Converged Architecture
    6. Implement Small and Remote Wireless Access
    • FlexConnect Architecture
    • Autonomous Architecture
    • Cloud Architecture
    7. WLAN Maintenance and Troubleshooting
    • Wireless Maintenance
    • Troubleshooting Tools
    • Troubleshooting Methodology
    8. WLAN Design
    • Predictive WLAN Design Process
    • WLAN Site Survey Process
     

    Details & Documents

    Documents:
    NA
    Details:
    REQUIRED EXAMS 200-355 WIFUND PREREQUISITES ICND1 or CCENT certification, plus ICND2
    Foundational knowledge of 802.11 wireless network technologies
    ICND1 v3.0 - Interconnecting Cisco Networking Devices, Part 1
    ICND2 v3.0 - Interconnecting Cisco Networking Devices, Part 2
    Enterprise Wi-Fi Administration (CWNA) WHO SHOULD ATTEND Network engineers, network administrators, network managers, and system engineers
    WLAN designers, planners, implementers, and optimizers
    Anyone wishing to attain CCNA Wireless or CCNP Wireless certification
     

  • Policy Terms
  • Terms & Conditions

    NA

    Refund & Cancellation

    NA

    Read More Details
    Inform IBM
    MCSA - Windows server 2012- 30% Off On Demand 4 Hours 90 Hours 2 Days Microsoft international Heliopolis Branch 2,600 (EGP)
    182.00 EGP
    Cashback
    Price Including Material
    Reserve course Price Including Material
    5562 Views

    Price

    2,600 (EGP) - Price Including Material

    Days Per week

    2 Days

    Lecture Duration

    4 Hours

    Class Time

    Morning

    Available branches

    Total course hours

    90

    Start date on demand

    Yes

    Start time

    End time

    Pace

    Half Day Training

    Accredited by

    Microsoft international

    Installment

    No

    Summary

    This course covers implementing, managing, maintaining and provisioning services and infrastructure in a Windows Server 2012 environment and prepares for attending the MCSA certificate exams. Earning the MCSA certificate shows that you have the primary set of Windows Server 2012 skills, relevant across multiple solution areas in a business environment, to reduce IT costs and deliver more business value. Earning an MCSA: Windows Server 2012 Certification will qualify you for a position as a network or computer systems administrator or a computer support specialist.

    This course is intended for information technology (IT) professionals who have some knowledge and experience working with Windows operating systems and who want to acquire the skills and knowledge necessary to install manage, maintain and provisioning services and infrastructure in a Windows server 2012 environment in an existing Windows server environment. Windows server administrators who are relatively new to Windows server administration and the related technologies and are looking to up skill on Windows server 2012 or Windows server 2012 R2

    Material Contents

    Earning the Microsoft Certified Solutions Associate (MCSA): Windows Server 2012 certification confirms that you have core Windows Server 2012 skills that are relevant across multiple solution areas. This foundational certification validates your ability to work with Windows Server 2012 in a real-world business context.  70-410: Installing and Configuring Windows Server 2012 70-411: Administering Windows Server 2012 70-412: Configuring Advanced Windows Server 2012 Services

    Details & Documents

    Installing and Configuring Windows Server® 2012

    At course completionAfter completing this course, students will be able to:
    • Install and configure Windows Server 2012.
    • Describe AD DS.
    • Manage Active Directory objects.
    • Automate Active Directory administration.
    • Implement IPv4.
    • Implement Dynamic Host Configuration Protocol (DHCP).
    • Implement Domain Name System (DNS).
    • Implement IPv6.
    • Implement local storage.
    • Implement file and print services.
    • Implement Group Policy.
    • Secure Windows servers by using Group Policy Objects (GPOs).
    • Implement server virtualization by using Hyper-V.
    • Administering Windows Server® 2012


    • At course completionAfter completing this course, students will be able to:
      • Configure and Troubleshoot Domain Name System
      • Maintain Active Directory Domain Services
      • Manage User and Service Accounts
      • Implement Group Policy Infrastructure
      • Manage User Desktops using Group Policy
      • Install, Configure and Troubleshoot Network Policy Server
      • Implement Network Access Protection
      • Implement Remote Access
      • Optimize File Services
      • Configure Encryption and Advanced Auditing
      • Deploy and Maintain Server Images
      • Implement Update Managements
      • Monitor Windows Server 2012
      • Configuring Advanced Windows Server® 2012 Services


      • At course completionAfter completing this course, students will be able to:
        • Configure advanced features for Dynamic Host Configuration Protocol (DHCP), Domain Name System (DNS), and configure IP Address Management (IPAM) with Windows Server 2012.
        • Configure and manage iSCSI, BranchCache and FSRM.
        • Configure DAC to manage and audit access to shared files.
        • Plan and implement an AD DS deployment that includes multiple domains and forests.
        • Plan and implement an AD DS deployment that includes locations.
        • Implement and configure an Active Directory Certificate Services (AD CS) deployment.
        • Implement an AD RMS deployment.
        • Implement an AD FS deployment.
        • Provide high availability and load balancing for web-based applications by implementing Network Load Balancing (NLB).
        • Implement and validate high availability and load balancing for web-based applications by implementing NLB.
        • Provide high availability for network services and applications by implementing failover clustering.
        • Implement a failover cluster, and configure and validate a highly available network service.
        • Deploy and manage Hyper-V virtual machines in a failover cluster.
        • Implement a backup and disaster recovery solution based on business and technical requirements.

    Terms & Conditions

    NA

    Refund & Cancellation

    NA

  • Highlights
  • Price

    2,600 (EGP) - Price Including Material

    Days Per week

    2 Days

    Lecture Duration

    4 Hours

    Class Time

    Morning

    Available branches

    Total course hours

    90

    Start date on demand

    Yes

    Start time

    End time

    Pace

    Half Day Training

    Accredited by

    Microsoft international

    Installment

    No

  • Product Details
  • Summary

    This course covers implementing, managing, maintaining and provisioning services and infrastructure in a Windows Server 2012 environment and prepares for attending the MCSA certificate exams. Earning the MCSA certificate shows that you have the primary set of Windows Server 2012 skills, relevant across multiple solution areas in a business environment, to reduce IT costs and deliver more business value. Earning an MCSA: Windows Server 2012 Certification will qualify you for a position as a network or computer systems administrator or a computer support specialist.

    This course is intended for information technology (IT) professionals who have some knowledge and experience working with Windows operating systems and who want to acquire the skills and knowledge necessary to install manage, maintain and provisioning services and infrastructure in a Windows server 2012 environment in an existing Windows server environment. Windows server administrators who are relatively new to Windows server administration and the related technologies and are looking to up skill on Windows server 2012 or Windows server 2012 R2

    Material Contents

    Earning the Microsoft Certified Solutions Associate (MCSA): Windows Server 2012 certification confirms that you have core Windows Server 2012 skills that are relevant across multiple solution areas. This foundational certification validates your ability to work with Windows Server 2012 in a real-world business context.  70-410: Installing and Configuring Windows Server 2012 70-411: Administering Windows Server 2012 70-412: Configuring Advanced Windows Server 2012 Services

    Details & Documents

    Installing and Configuring Windows Server® 2012

    At course completionAfter completing this course, students will be able to:
    • Install and configure Windows Server 2012.
    • Describe AD DS.
    • Manage Active Directory objects.
    • Automate Active Directory administration.
    • Implement IPv4.
    • Implement Dynamic Host Configuration Protocol (DHCP).
    • Implement Domain Name System (DNS).
    • Implement IPv6.
    • Implement local storage.
    • Implement file and print services.
    • Implement Group Policy.
    • Secure Windows servers by using Group Policy Objects (GPOs).
    • Implement server virtualization by using Hyper-V.
    • Administering Windows Server® 2012


    • At course completionAfter completing this course, students will be able to:
      • Configure and Troubleshoot Domain Name System
      • Maintain Active Directory Domain Services
      • Manage User and Service Accounts
      • Implement Group Policy Infrastructure
      • Manage User Desktops using Group Policy
      • Install, Configure and Troubleshoot Network Policy Server
      • Implement Network Access Protection
      • Implement Remote Access
      • Optimize File Services
      • Configure Encryption and Advanced Auditing
      • Deploy and Maintain Server Images
      • Implement Update Managements
      • Monitor Windows Server 2012
      • Configuring Advanced Windows Server® 2012 Services


      • At course completionAfter completing this course, students will be able to:
        • Configure advanced features for Dynamic Host Configuration Protocol (DHCP), Domain Name System (DNS), and configure IP Address Management (IPAM) with Windows Server 2012.
        • Configure and manage iSCSI, BranchCache and FSRM.
        • Configure DAC to manage and audit access to shared files.
        • Plan and implement an AD DS deployment that includes multiple domains and forests.
        • Plan and implement an AD DS deployment that includes locations.
        • Implement and configure an Active Directory Certificate Services (AD CS) deployment.
        • Implement an AD RMS deployment.
        • Implement an AD FS deployment.
        • Provide high availability and load balancing for web-based applications by implementing Network Load Balancing (NLB).
        • Implement and validate high availability and load balancing for web-based applications by implementing NLB.
        • Provide high availability for network services and applications by implementing failover clustering.
        • Implement a failover cluster, and configure and validate a highly available network service.
        • Deploy and manage Hyper-V virtual machines in a failover cluster.
        • Implement a backup and disaster recovery solution based on business and technical requirements.

  • Policy Terms
  • Terms & Conditions

    NA

    Refund & Cancellation

    NA

    Read More Details
    Al Ahram Newspaper - AMAC Training Center
    ICDL Certification On Demand 60 Minutes 79 Hours 3 Days ICDL Arabia Down Town 2,350 (EGP)
    235.00 EGP
    Cashback
    Price Including Material
    Reserve course Price Including Material
    4367 Views

    Price

    2,350 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    60 Minutes

    Class Time

    Evening

    Available branches

    Total course hours

    79

    Start date on demand

    Yes

    Start time

    1:00:00 AM

    End time

    1:00:00 AM

    Pace

    Half Day Training

    Accredited by

    ICDL Arabia

    Installment

    Yes

    Summary

    هذه الشهادة تعتبر المعيار لمهارات تكنولوجيا الاتصالات والمعلومات، أيا كان دورك في المجتمع هذه الشهادة ستكون مناسبة لك.

    Material Contents

    • Concepts of Information and communication technology
    • Using the computer and managing files
    • Word Processing
    • Spreadsheets
    • Database
    • Presentation
    • Web Browsing & communication

    Details & Documents

    Documents:

    • Copy of ID
    • Personal Photo
    • Copy of birth certificate for children under 16 years

    Details:
    • You can use the office programmes.
    • Improvement of your speed and efficiency at home and at work.
    • Flexible modular system
    • More productive, organised and efficient
    • Simple and practical requirements
    • You get an international certificate to prove your qualification.
    • Better employment opportunities.

    Terms & Conditions

    • Registration for courses is subject to the conditions for admission and after the payment of the prescribed fees before start of course.
    • If the required number of any of the courses mentioned not completed, it will be postponed if possible or canceled.
    • Special groups can be arranged in coordination with the AMAC Training Center.
    • Apply from Companies:
      • Registration for a course is required to provide a letter stating applying and the willingness of the employer to pay the prescribed fees and the candidate meets the requirements of joining the course.
      • Payment of fees in cash or by check on behalf of "Al-Ahram Organization" - "Public Administration" before the start of the course.
      • If the fees are not paid by the employers, the candidate must pay them at his own expense.

    Refund & Cancellation

    • You can unsubscribe at least two days before the start of the course
    • Fees for any course after the start of the course are strictly prohibited

  • Highlights
  • Price

    2,350 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    60 Minutes

    Class Time

    Evening

    Available branches

    Total course hours

    79

    Start date on demand

    Yes

    Start time

    1:00:00 AM

    End time

    1:00:00 AM

    Pace

    Half Day Training

    Accredited by

    ICDL Arabia

    Installment

    Yes

  • Product Details
  • Summary

    هذه الشهادة تعتبر المعيار لمهارات تكنولوجيا الاتصالات والمعلومات، أيا كان دورك في المجتمع هذه الشهادة ستكون مناسبة لك.

    Material Contents

    • Concepts of Information and communication technology
    • Using the computer and managing files
    • Word Processing
    • Spreadsheets
    • Database
    • Presentation
    • Web Browsing & communication

    Details & Documents

    Documents:

    • Copy of ID
    • Personal Photo
    • Copy of birth certificate for children under 16 years

    Details:
    • You can use the office programmes.
    • Improvement of your speed and efficiency at home and at work.
    • Flexible modular system
    • More productive, organised and efficient
    • Simple and practical requirements
    • You get an international certificate to prove your qualification.
    • Better employment opportunities.

  • Policy Terms
  • Terms & Conditions

    • Registration for courses is subject to the conditions for admission and after the payment of the prescribed fees before start of course.
    • If the required number of any of the courses mentioned not completed, it will be postponed if possible or canceled.
    • Special groups can be arranged in coordination with the AMAC Training Center.
    • Apply from Companies:
      • Registration for a course is required to provide a letter stating applying and the willingness of the employer to pay the prescribed fees and the candidate meets the requirements of joining the course.
      • Payment of fees in cash or by check on behalf of "Al-Ahram Organization" - "Public Administration" before the start of the course.
      • If the fees are not paid by the employers, the candidate must pay them at his own expense.

    Refund & Cancellation

    • You can unsubscribe at least two days before the start of the course
    • Fees for any course after the start of the course are strictly prohibited

    Read More Details
    MTC
    Water CAD Variable 3 Hours 21 Hours 3 Days Engineers Syndicate Nasr City 1,100 (EGP)
    110.00 EGP
    Cashback
    Price Including Material
    Reserve course Price Including Material
    5329 Views

    Price

    1,100 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    3 Hours

    Class Time

    Evening

    Available branches

    Total course hours

    21

    Start time

    6:00:00 PM

    End time

    9:00:00 PM

    Pace

    Full Day Training

    Accredited by

    Engineers Syndicate

    Installment

    No

    Summary

        Overview: WaterCAD is a program that is designed mainly to simulate pressurized flow in pipe network. It can be used in simulation of potable water or irrigation network

    Material Contents

    Session Session Contents 1

    • Introduction
    • Data entry to WaterCAD
    2 Working with different elements in watercad (pipes, junctions, tanks, reservoirs, valves and pumps) 3 Pattern and its use in simulation 4 Color coding, graphs and annotations 5 Importing and exporting data from different formates (dxf, xls, shape) 6 Types of simulations (Steady, EPS) 7 Alternatives and scenarios

    Details & Documents

    Documents:
    1. Personal card. 2. University card. 3-The Engineers Syndicate card.
    Details:
    Session Session Contents 1

    • Introduction
    • Data entry to WaterCAD
    2 Working with different elements in watercad (pipes, junctions, tanks, reservoirs, valves and pumps) 3 Pattern and its use in simulation 4 Color coding, graphs and annotations 5 Importing and exporting data from different formates (dxf, xls, shape) 6 Types of simulations (Steady, EPS) 7 Alternatives and scenarios

    Terms & Conditions

    1 - Registration in the course before the start date of at least 5 days. 2 - You can cancel the reservation at 3 at most before the start of the course. 3- Certificates approved by the Engineers Syndicate and Autodesk International Company. 4- Certificates can not be obtained in case of absence 3 times at most.

    Refund & Cancellation

    Booking Terms: 1 - The course is reserved by paying only 200 Egyptian pounds before the start of the course. 2 - Payment can be made by using cash favon. 3. Payment can be made by using postal order. Recovery Terms: 1 - to cancel the reservation of the course before the beginning of the course of not less than 3 days. 2. If the time limit is not met, the amount of the reservation can not be refunded.

  • Highlights
  • Price

    1,100 (EGP) - Price Including Material

    Days Per week

    3 Days

    Lecture Duration

    3 Hours

    Class Time

    Evening

    Available branches

    Total course hours

    21

    Start time

    6:00:00 PM

    End time

    9:00:00 PM

    Pace

    Full Day Training

    Accredited by

    Engineers Syndicate

    Installment

    No

  • Product Details
  • Summary

        Overview: WaterCAD is a program that is designed mainly to simulate pressurized flow in pipe network. It can be used in simulation of potable water or irrigation network

    Material Contents

    Session Session Contents 1

    • Introduction
    • Data entry to WaterCAD
    2 Working with different elements in watercad (pipes, junctions, tanks, reservoirs, valves and pumps) 3 Pattern and its use in simulation 4 Color coding, graphs and annotations 5 Importing and exporting data from different formates (dxf, xls, shape) 6 Types of simulations (Steady, EPS) 7 Alternatives and scenarios

    Details & Documents

    Documents:
    1. Personal card. 2. University card. 3-The Engineers Syndicate card.
    Details:
    Session Session Contents 1

    • Introduction
    • Data entry to WaterCAD
    2 Working with different elements in watercad (pipes, junctions, tanks, reservoirs, valves and pumps) 3 Pattern and its use in simulation 4 Color coding, graphs and annotations 5 Importing and exporting data from different formates (dxf, xls, shape) 6 Types of simulations (Steady, EPS) 7 Alternatives and scenarios

  • Policy Terms
  • Terms & Conditions

    1 - Registration in the course before the start date of at least 5 days. 2 - You can cancel the reservation at 3 at most before the start of the course. 3- Certificates approved by the Engineers Syndicate and Autodesk International Company. 4- Certificates can not be obtained in case of absence 3 times at most.

    Refund & Cancellation

    Booking Terms: 1 - The course is reserved by paying only 200 Egyptian pounds before the start of the course. 2 - Payment can be made by using cash favon. 3. Payment can be made by using postal order. Recovery Terms: 1 - to cancel the reservation of the course before the beginning of the course of not less than 3 days. 2. If the time limit is not met, the amount of the reservation can not be refunded.

    Read More Details
    American Chamber of Commerce - CDC
    Sales Management Certificate ( SMC ) Variable 4:30 Hours 49 Hours 2 Days American Chamber Of Commerce 5 Branches 6,500 (EGP)
    130.00 EGP
    Cashback
    Material price 1500 (EGP)
    Reserve course Material price 1500 (EGP)
    3701 Views

    Price

    6,500 (EGP) - 1,500 (EGP) Material price

    Days Per week

    2 Days

    Lecture Duration

    4 :30 Hours

    Class Time

    Morning

    Total course hours

    49

    Start time

    End time

    Pace

    Half Day Training

    Accredited by

    American Chamber Of Commerce

    Installment

    No

    Summary

    The Sales Management Certificate (SMC) is offered by the American Chamber of Commerce in Egypt’s Career Development Center. The SMC shows that holders can think strategically about how to use sales forces to create customer value and competitive advantages, and develop the core competencies that every sales manager needs.

    Material Contents

    NA

    Details & Documents

    Program Content:

    • Introduction to Selling and Sales Management
    • Strategy and Sales Program Planning
    • Sales Opportunity Management
    • Account Relationship Management
    • Customer Interaction Management
    • Sales Force Organization
    • Recruiting and Selecting Personnel
    • Sales Training
    • Leadership
    • Ethical Leadership
    • Motivating Sales People
    • Compensating Sales People
    • Evaluating Performance

    Terms & Conditions

    NA

    Refund & Cancellation

    In case of course cancellation/ postponement by CDC 100%refund is provided.

  • Highlights
  • Price

    6,500 (EGP) - 1,500 (EGP) Material price

    Days Per week

    2 Days

    Lecture Duration

    4 :30 Hours

    Class Time

    Morning

    Total course hours

    49

    Start time

    End time

    Pace

    Half Day Training

    Accredited by

    American Chamber Of Commerce

    Installment

    No

  • Product Details
  • Summary

    The Sales Management Certificate (SMC) is offered by the American Chamber of Commerce in Egypt’s Career Development Center. The SMC shows that holders can think strategically about how to use sales forces to create customer value and competitive advantages, and develop the core competencies that every sales manager needs.

    Material Contents

    NA

    Details & Documents

    Program Content:

    • Introduction to Selling and Sales Management
    • Strategy and Sales Program Planning
    • Sales Opportunity Management
    • Account Relationship Management
    • Customer Interaction Management
    • Sales Force Organization
    • Recruiting and Selecting Personnel
    • Sales Training
    • Leadership
    • Ethical Leadership
    • Motivating Sales People
    • Compensating Sales People
    • Evaluating Performance

  • Policy Terms
  • Terms & Conditions

    NA

    Refund & Cancellation

    In case of course cancellation/ postponement by CDC 100%refund is provided.

    Read More Details
    Herotec
    PMP – Project Management Professional Variable 60 Minutes 40 Hours 1 Day ITIL 2 Branches 2,500 (EGP)
    225.00 EGP
    Cashback
    Price Including Material
    Reserve course Price Including Material
    7321 Views

    Price

    2,500 (EGP) - Price Including Material

    Days Per week

    1 Days

    Lecture Duration

    60 Minutes

    Class Time

    Evening

    Total course hours

    40

    Start time

    End time

    Pace

    Half Day Training

    Accredited by

    ITIL

    Summary

    Course Overview Pmp training Course PMP Course is one of the Project Management Institute (PMI)® Certifications where the project management credential of choice across a vast array of industries and companies. By attaining your PMI Certifications, your name will be included in the largest and most prestigious group of certified professionals in the project management community.

    Material Contents

    NA

    Details & Documents

    Documents:
    PMP Learning Benefits:

    • Recognize your ability by PMP credential
    • Align your project management knowledge with PMBOK® Guide terminology and definitions
    • Enhances your skills & Improves project performance
    • Expands your market reach
    • Displays your ability to handle challenging projects
    • Brings you challenging projects.
    • Great job opportunities
      Who Should Attend?
    • Project Managers
    • Individuals who are performing projects as a project coordinator,
    • project leaders
    • Business analysts
    • PM Practitioners seeking professional development to advance their career
    • Professionals looking for  a career move into the PM field
    • Entrepreneurs and business owners in project-based organization.
    Course Schedule: This course is typically offered four times per year at both Herotec classrooms & four times per year for online classes with Arabic & English language.
    Details:
    Course Outline

      • 1 - Examining Professional Project Management
        • Identify Project Management Processes
        • Identify Professional and Social Responsibilities
        • Identify the Interpersonal Skills Required for a Project Manager
      • 2 - Initiating a Project
        • Examine the Project Management Context
        • Examine Project Selection
        • Prepare a Project Statement of Work
        • Create a Project Charter
        • Identify Project Stakeholders
      • 3 - Planning Project Work
        • Identify Elements of the Project Management Plan
        • Document Stakeholder Requirements
        • Create a Scope Statement
        • Develop a Work Breakdown Structure
      • 4 - Developing Project Schedules
        • Create an Activity List
        • Create a Project Schedule Network Diagram
        • Estimate Activity Resources
        • Estimate Duration for Project Activities
        • Develop a Project Schedule
        • Identify the Critical Path
        • Optimize the Project Schedule
        • Establish a Schedule Baseline
      • 5 - Developing Cost Estimates and Budgets
        • Estimate Project Costs
        • Estimate the Preliminary
        • Cost Baseline
        • Reconcile Funding and Costs
      • 6 - Planning Project Quality, Staffing, and Communications
        • Create a Quality Management Plan
        • Document the Project Roles, Responsibilities, and Reporting Relationships
        • Create a Communications Management Plan
      • 7 - Analyzing Risks and Planning Risk Responses
        • Examine a Risk Management Plan
        • Identify Project Risks and Triggers
        • Perform Qualitative Risk Analysis
        • Perform Quantitative Risk Analysis
        • Develop a Risk Response Plan
      • 8 - Planning Project Procurement
        • Plan Project Procurements
        • Prepare a Procurement Statement of Work
        • Prepare a Procurement Document
      • 9 - Executing Project Work
        • Identifying the Direct and Manage Project Execution Process
        • Execute a Quality Assurance Plan
        • Acquire the Project Team
        • Develop the Project Team
        • Manage the Project Team
        • Distribute Project Information
        • Manage Stakeholder Relationships and Expectations
      • 10 - Managing Project Procurement
        • Identify the Conduct Project Procurements Process
        • Obtain Responses from Sellers
        • Determine Project Sellers
      • 11 - Monitoring and Controlling Project Work
        • Identify the Monitor and Control Project Work Process
        • Develop an Integrated Change Control System
        • Utilize the Integrated Change Control System
        • Review Deliverables and Work Results
        • Control the Project Scope
      • 12 - Monitoring and Controlling Project Schedule and Costs
        • Control the Project Schedule
        • Control Project Costs
      • 13 - Monitoring and Controlling Project Performance and Quality
        • Perform Quality Control
        • Report on Project Performance
      • 14 - Monitoring and Controlling Project Risk and Procurements
        • Monitor and Control Project Risk
        • Administer Project Procurements
      • 15 - Closing the Project
        • Close Project Procurements
        • Close the Project or Phase Administratively
      •  

    Terms & Conditions

    Rules & Regulation: Please read the following carefully and feel free to contact us for any inquiry.
    1. Herotec is committed to deliver training classrooms with the most experts, specialized Instructors in the field.
    2. Herotec is committed to start the course as defined in your application, in some conditions due to efforts to reconcile the course start date & course days schedule to suit all attendees , the course start may be delayed one or two weeks by maximum .
    3. A participant is required to attend the whole course program in order to receive his/her attendance certificate.
    4. If you cannot attend the training program, you may hold your course program to the next classroom of the same course you should send a letter stating the reasons to our training coordinator. Please be informed that your request may be accepted or refused as per conditions for every course.
    5. A participant is required to respond to any monitoring and evaluation activities such as: (1) To submit questionnaire to evaluate a training at the end of the training. (2) To submit a voting.
    6. You have the right to repeat the course in 6 months after end of your running course free in case of available seats in the new classroom.
    7. The Trainees (colleagues in the same group) have the right to hold one or two sessions maximum during the whole course program.
    8. You have the right to get the attendance certificate provided that you attend more than 80% of the whole duration of the course.
    9. Please always contact with the training coordinator in case you need any assistance.

    Refund & Cancellation

    Refund Policy: If a customer request a refund the for fees paid for the course/courses he must proceed a request to the administration provided that the request is answered by the administration within 10 days. In case the refund request is accepted, client will take all his payment in the first or 15th of the month. It’s required to attach the original invoice with the refund request application and we will deduct the administration expenses as the following cases: 1- Course not started due to a reason at Herotec : The client will take all his fees. 2- The client excuse after the coordinator told him with the start date: deduct 50% from the course fees. 3- The client excuse with the start of the course: the client lost his right to take the fees but save his right to hold the course.

  • Highlights
  • Price

    2,500 (EGP) - Price Including Material

    Days Per week

    1 Days

    Lecture Duration

    60 Minutes

    Class Time

    Evening

    Total course hours

    40

    Start time

    End time

    Pace

    Half Day Training

    Accredited by

    ITIL

  • Product Details
  • Summary

    Course Overview Pmp training Course PMP Course is one of the Project Management Institute (PMI)® Certifications where the project management credential of choice across a vast array of industries and companies. By attaining your PMI Certifications, your name will be included in the largest and most prestigious group of certified professionals in the project management community.

    Material Contents

    NA

    Details & Documents

    Documents:
    PMP Learning Benefits:

    • Recognize your ability by PMP credential
    • Align your project management knowledge with PMBOK® Guide terminology and definitions
    • Enhances your skills & Improves project performance
    • Expands your market reach
    • Displays your ability to handle challenging projects
    • Brings you challenging projects.
    • Great job opportunities
      Who Should Attend?
    • Project Managers
    • Individuals who are performing projects as a project coordinator,
    • project leaders
    • Business analysts
    • PM Practitioners seeking professional development to advance their career
    • Professionals looking for  a career move into the PM field
    • Entrepreneurs and business owners in project-based organization.
    Course Schedule: This course is typically offered four times per year at both Herotec classrooms & four times per year for online classes with Arabic & English language.
    Details:
    Course Outline

      • 1 - Examining Professional Project Management
        • Identify Project Management Processes
        • Identify Professional and Social Responsibilities
        • Identify the Interpersonal Skills Required for a Project Manager
      • 2 - Initiating a Project
        • Examine the Project Management Context
        • Examine Project Selection
        • Prepare a Project Statement of Work
        • Create a Project Charter
        • Identify Project Stakeholders
      • 3 - Planning Project Work
        • Identify Elements of the Project Management Plan
        • Document Stakeholder Requirements
        • Create a Scope Statement
        • Develop a Work Breakdown Structure
      • 4 - Developing Project Schedules
        • Create an Activity List
        • Create a Project Schedule Network Diagram
        • Estimate Activity Resources
        • Estimate Duration for Project Activities
        • Develop a Project Schedule
        • Identify the Critical Path
        • Optimize the Project Schedule
        • Establish a Schedule Baseline
      • 5 - Developing Cost Estimates and Budgets
        • Estimate Project Costs
        • Estimate the Preliminary
        • Cost Baseline
        • Reconcile Funding and Costs
      • 6 - Planning Project Quality, Staffing, and Communications
        • Create a Quality Management Plan
        • Document the Project Roles, Responsibilities, and Reporting Relationships
        • Create a Communications Management Plan
      • 7 - Analyzing Risks and Planning Risk Responses
        • Examine a Risk Management Plan
        • Identify Project Risks and Triggers
        • Perform Qualitative Risk Analysis
        • Perform Quantitative Risk Analysis
        • Develop a Risk Response Plan
      • 8 - Planning Project Procurement
        • Plan Project Procurements
        • Prepare a Procurement Statement of Work
        • Prepare a Procurement Document
      • 9 - Executing Project Work
        • Identifying the Direct and Manage Project Execution Process
        • Execute a Quality Assurance Plan
        • Acquire the Project Team
        • Develop the Project Team
        • Manage the Project Team
        • Distribute Project Information
        • Manage Stakeholder Relationships and Expectations
      • 10 - Managing Project Procurement
        • Identify the Conduct Project Procurements Process
        • Obtain Responses from Sellers
        • Determine Project Sellers
      • 11 - Monitoring and Controlling Project Work
        • Identify the Monitor and Control Project Work Process
        • Develop an Integrated Change Control System
        • Utilize the Integrated Change Control System
        • Review Deliverables and Work Results
        • Control the Project Scope
      • 12 - Monitoring and Controlling Project Schedule and Costs
        • Control the Project Schedule
        • Control Project Costs
      • 13 - Monitoring and Controlling Project Performance and Quality
        • Perform Quality Control
        • Report on Project Performance
      • 14 - Monitoring and Controlling Project Risk and Procurements
        • Monitor and Control Project Risk
        • Administer Project Procurements
      • 15 - Closing the Project
        • Close Project Procurements
        • Close the Project or Phase Administratively
      •  

  • Policy Terms
  • Terms & Conditions

    Rules & Regulation: Please read the following carefully and feel free to contact us for any inquiry.
    1. Herotec is committed to deliver training classrooms with the most experts, specialized Instructors in the field.
    2. Herotec is committed to start the course as defined in your application, in some conditions due to efforts to reconcile the course start date & course days schedule to suit all attendees , the course start may be delayed one or two weeks by maximum .
    3. A participant is required to attend the whole course program in order to receive his/her attendance certificate.
    4. If you cannot attend the training program, you may hold your course program to the next classroom of the same course you should send a letter stating the reasons to our training coordinator. Please be informed that your request may be accepted or refused as per conditions for every course.
    5. A participant is required to respond to any monitoring and evaluation activities such as: (1) To submit questionnaire to evaluate a training at the end of the training. (2) To submit a voting.
    6. You have the right to repeat the course in 6 months after end of your running course free in case of available seats in the new classroom.
    7. The Trainees (colleagues in the same group) have the right to hold one or two sessions maximum during the whole course program.
    8. You have the right to get the attendance certificate provided that you attend more than 80% of the whole duration of the course.
    9. Please always contact with the training coordinator in case you need any assistance.

    Refund & Cancellation

    Refund Policy: If a customer request a refund the for fees paid for the course/courses he must proceed a request to the administration provided that the request is answered by the administration within 10 days. In case the refund request is accepted, client will take all his payment in the first or 15th of the month. It’s required to attach the original invoice with the refund request application and we will deduct the administration expenses as the following cases: 1- Course not started due to a reason at Herotec : The client will take all his fees. 2- The client excuse after the coordinator told him with the start date: deduct 50% from the course fees. 3- The client excuse with the start of the course: the client lost his right to take the fees but save his right to hold the course.

    Read More Details